Adding Color to Your Fizzy Bath Bombs

  • 01 of 04

    Adding Color to Fizzy Bath Bombs

    Bath bombs
    Armstrong Studios / Getty Images

    Every once in a while—for a special occasion, holiday or season—you might want to add some color to the bath bombs to make them a bit more festive. After adding color, you can use shaped molds to make bath bombs for holidays, such as tinted heart-shaped bath bombs for Valentine's Day.


    There are a couple of ways to add color—one in the wet phase and one in the dry phase. In addition to the other ingredients for the bath bombs, you'll need water-based or water-soluble dry colorants.


    For more...MORE information on making bath bombs, check out the video at How to Make Bath Bombs.


    If you are satisfied leaving your fizzy bath bombs plain white with no colorant added, you can refer to the instructions in Make Fizzy Bath Bombs.


    Continue to 2 of 4 below.
  • 02 of 04

    Option 1 - Add the Colorant With the Liquid Phase

    Adding Liquid Colorant
    Adding Liquid Colorant. David Fisher

    The simplest way to add colorant is to put it in during the liquid phase. You can use either water-based or dry colorants—as long as they are water soluble. Micas and oxides disperse in water, but they are not water soluble, and the results in the bathtub can be a bit unpredictable. 


    As you mix the wet phase of the bath bomb recipe, add the liquid colorant to the water after you add the borax but before you add fragrance oil. If you're using a water-soluble dry colorant, add enough water to...MORE it to make it equal a half teaspoon or so. (You can always add more water later.) Shake well and then mix the wet and dry phases together. The color is evenly dispersed throughout the bath bomb.


    Continue to 3 of 4 below.
  • 03 of 04

    Option 2 - Add the Colorant to the Dry Phase

    Color in Epsom Salt
    Colorant in Epsom Salt. David Fisher

    You can also add the colorant to the dry phase—or at least the first part of the dry phase.


    For a speckled, textured look, add the colorant to one of the salts before you mix it in with the rest of the ingredients.


    For the best effect, add the liquid colorant to the Epsom salt. The grains of the salt are large and hold the color well. Put the Epsom salt by itself in a small bowl and add the few drops of colorant. Stir well with a whisk. Some of the salt dissolves a little bit, but most of it...MORE retains its shape and takes on the color.


    Mix the colored salt in with the rest of the dry ingredients and mix the bath bombs as you normally would.


    Some of the colorants will bleed into the rest of the mixture, but much of it stays in the Epsom salt.


    Continue to 4 of 4 below.
  • 04 of 04

    A Burst of Fizzy Color

    Orange Bath bombs
    Claire Knights

    If you wonder whether the colorant you put in the bath bombs will color the bath water, the answer is sometimes, depending on the type and amount of colorant you use. Because of the whiteness of the salt, you're never going to get a dark color, only a light pastel. If you're concerned about the colorant and usage level, test it on small batches until you're pleased with the results.