When adding oil for a stir-fry, you want the oil to partially coat about half way up the sides of the wok as well as the bottom. This is because food is often pushed up to the sides of the wok during stir-frying. For example, in a chicken and vegetable stir-fry, the vegetables may be stir-fried briefly, then pushed to the sides of the wok, and the chicken meat added in the middle. The vegetables finish cooking (but not burning) at a lower heat on the sides, while you are stir-frying the chicken meat in the middle, hottest portion of the wok.
An added benefit to spreading the oil over the sides and bottom of the wok is that it heats faster.
Two Methods for Adding Oil to a Wok
- Method 1: The preferred method. Swirl or drizzle the oil into a pre-heated wok, aiming so that it hits a point about halfway up the sides of the wok. Then tilt the wok and move it back and forth and from side to side, so that the lower half of the wok sides and the bottom are thoroughly coated.
- Method 2: Add the oil to a preheated wok, then use the back of a spatula to coat the sides of the wok with the oil, going about halfway up.
More Wok Cooking Resources
- How to Tell if Your Wok is Hot Enough for Stir-frying
- Twenty Tips for Stir-frying
- Stir-fry Recipes
- What Type of Oil Should You Use for Stir-frying?
- How to Season a Carbon Steel Wok
- How to Clean a Carbon Steel Wok