How to Make a Basket Liner for a Round- or Square-Based Basket

Measure the Basket
Measure the Basket. Debbie Colgrove, Licensed to About.com
  • 01 of 06

    Sew a Basket Liner for a Round or Square Based Basket

    Baskets can be an inexpensive home decorating item, and they can be made of safe materials. Keep the contents of your baskets safe and clean by sewing liners for them. 

    You'll need:

    • Fabric — the amount will depend on the size of your basket
    • 1/4-inch wide elastic, cut to the distance around the top of the basket
    • Thread to match the fabric
    Continue to 2 of 6 below.
  • 02 of 06

    Create the Base Pattern Piece

    Measure the Basket
    Measure the Basket. Debbie Colgrove, Licensed to About.com

    Measure the base of the basket and add a 1/2-inch seam allowance to each side of the base piece, or use gift-wrapping tissue to fold to the base size. Sharply crease the folds, pressing the tissue into the edges of the bottom. Remove the tissue and add 1/2 an inch to the edge of the folds for a seam allowance before cutting the tissue to size for the base pattern piece.

    Continue to 3 of 6 below.
  • 03 of 06

    Make the Liner Sides

    Fabric Basket Liner Sides
    Liner Sides. Debbie Colgrove, Licensed to About.com

    Measure the distance around the top and the bottom of the sides. Using the larger measurement, multiply by 1.5 for measurement A.

    Measure the height of the sides from the base and over the top edge to the spot where you want the liner to end. Be sure to allow enough for the liner to go over the top edge. Add 1 1/2 inches for a seam allowance and the elastic casing.

    Create a rectangle piece that is Measurement A by Measurement B. If the measurement is larger than the width of your fabric, divide...MORE the measurement in half and add 1 inch to each half. Cut two and seam them into one piece. 

    Now seam the ends of the rectangle you created for the sides of the basket liner. Apply a seam finish and press. Fold the side in quarters and gently press or mark the folds at the basted edge.

    Sew two rows of basting stitches in the 1/2-inch seam allowance at the bottom of the side piece. Match the fold marks on the side and bottom.

    Continue to 4 of 6 below.
  • 04 of 06

    Gathering the Side

    Gathering the side of the basket liner
    Gathering the Side. Debbie Colgrove, Licensed to About.com

    Pull the basting threads on the bottom of the side piece to gather the edge, evenly distributing the gathers so the side piece fits the base. Sew the side to the bottom using a 1/2-inch seam allowance. Trim the threads and the seam allowance if necessary. Apply a seam finish and press the seam toward the base piece.

    Continue to 5 of 6 below.
  • 05 of 06

    The Elastic Casing

    The Elastic Casing
    The Elastic Casing. Debbie Colgrove, Licensed to About.com

    Sew a line of stitching 3/8-inch from the top edge of the side piece. Press under the top edge on the stitching line, then press under again to enclose the raw edge. Stitch along the inner folded edge, leaving an opening to thread the elastic through.

    Continue to 6 of 6 below.
  • 06 of 06

    The Elastic

    Finished Fabric Basket Liner
    Finished Basket Liner. Debbie Colgrove, Licensed to About.com

    Measure the elastic so it fits the top edge of the basket, leaving an additional 1/2-inch for the elastic to overlap. Thread the elastic through the sewn casing by attaching a safety pin or bodkin to one end of the elastic. Overlap the ends of the elastic and sew the ends securely. Pull the elastic to the inside of the casing, then finish sewing the casing closed.