We independently research, test, review, and recommend the best products—learn more about our process. If you buy something through our links, we may earn a commission.
We researched dozens of bidet attachments from the top brands, evaluating ease of installation and use, temperature control, and value. Our best overall pick, the Tushy Spa 3.0, is a self-cleaning option that’s easy to set up and allows you to control the angle and pressure of the water flow.
Here are the best bidet attachments.
Best Overall: Tushy Spa 3.0
Nozzle Type: Angled Sprayer | Temperature Control: Yes
Can control angle and pressure
Comes in various colors
Setup can be lengthy
Who else recommends it? Runner's World, Verywell Health, and The Strategist all picked the Tushy Spa 3.0.
What do buyers say? 90% of 700+ Amazon reviewers rated this 4 stars or above.
If you want a bidet toilet seat that provides a more thorough clean and cuts down on the need for toilet paper, the Tushy Spa 3.0 surpasses the competition. Its spray feature lets you control the angle and water temperature, offering a refreshing rinse in seconds.
This bidet design is modernized and pleasing to the eye, with different knob materials and colors to accommodate your design scheme, including bamboo, platinum, gold, and bronze. There's also a self-cleaning nozzle, so you don't have to worry about maintenance in between uses. The only design drawback is that you'll need to install this toilet seat near your sink if you want warm temperature options. Also, the 9-foot hot-water attachment remains visible unless you find a solution to conceal it.
Tushy claims that the entire system takes about 10 minutes to install, but our tester experienced a longer set-up time and issues with leaks. If you have any concerns or run into problems, lean on the one-year limited warranty and an on-demand support team to assist with any questions.
"The pressure is strong enough to make sure you get squeaky clean but not so strong that it’s uncomfortable, even on full blast. Just like with the sink water, it does take a little time for the water to warm up, something I didn’t realize at first. It’s a good idea to let the bidet run a little bit on low pressure (it will just drip into the toilet bowl) to warm up before you turn the pressure up and have it touch your skin."—Lindsay Boyers, Product Tester
Easiest to Install: OMIGO Element Non-Electric Bidet Attachment
Nozzle Type: Front and Rear Sprayers | Temperature Control: Yes
Dual rear and front sprayers
Can control pressure
No hot water option
This easy-to-install bidet attachment will have you up and running in no time, without any complicated set up. This basic attachment has both a rear and front sprayer with adjustable pressures, so everyone in your family can get the perfect amount of cleaning for them. The sprayers are both self-cleaning and are housed in a protective case when they are not in use to keep them clean between uses.
Though this model doesn't come with a hot water option, the company makes a model called the Element+ that does connect to your sink's hot water line. As a result, that model is a bit more complicated to install.
"For hygiene purposes, I give it five stars. I wasn’t expecting much. I assumed that to get clean, I would need toilet paper first, then rinse off for some extra freshness. But the bidet did all of the work without the need for toilet paper."—Lindsay Boyers, Product Tester
Best Chrome: GoBidet Bidet Attachment
Nozzle Type: Adjustable, Cold Water | Temperature Control: No
Can control angle
Must purchase hot water kit separately
This attachment keeps it simple, both in design and in use. Once installed, you swing the bidet arm into place and then move the lever to turn on the spray. Unlike some picks on this list, this bidet attachment works for cold water only, unless you buy the compatible hot water kit, as well.
Best Non-Electric: GenieBidet Ultra Thin Toilet Attachment
Nozzle Type: Dual Front and Rear Sprayers, Ambient Water Temperature | Temperature Control: No
Dual rear and front sprayers
Can control angle and pressure
Includes travel bidet
Incompatible with one-piece French curve toilets
One of the top selling points of the GenieBidet is that it’s streamlined and won’t raise the height of your toilet seat — something that can create an uncomfortable position for many. It has separate nozzles for front and rear cleansing; both work via an adjustable spray knob that goes from soft to strong. It comes with a solid brass T-connector, ceramic valve, and a new steel braided hose for your toilet, just in case your current one has seen better days. It also comes with a bonus travel bidet, so you can spritz on the go. Note that the GenieBidet doesn’t work with one-piece French curve toilets.
Best Splurge: Brondell Swash 1400 Luxury Bidet Toilet Seat
Nozzle Type: Stainless Steel, Dual Front and Rear Sprayers, Ambient Water Temperature | Temperature Control: Yes
Has a drying function
Has a warm water option
This toilet seat works as a bidet attachment...and then some. It also offers a warm air dryer to dry your bum off when you’re finished, a heated seat so those winter trips to the bathroom aren’t jarring, a deodorizer, and a night light so you won’t ever have to fumble around on those middle of the night trips to the bathroom. But back to that bidet function: it offers warm water, nozzle oscillation from two stainless steel nozzles and it self-sterilizes after every use. Plus there’s a remote control that remembers the favorite settings of two different users. It does need to be hooked up to a GFCI outlet.
Best Handheld: RinseWorks Aquaus 360 Patented Handheld Bidet Sprayer
Can control angle and pressure
Can clean toilet bowl
Not hot water option
A handheld bidet attachment like this one gives you the ultimate control. You control the pressure with the touch of a button, and because you hold it, you control exactly where the water sprays. This set includes the sprayers with two spray heads plus a 5” extension, a brass T-connector and ball valve, a 54-inch stainless steel hose, and a toll-tank clip and sprayer holder. Satisfied Amazon reviewers say that it’s easy to install and well worth the cost, even though it’s similar in design to other less expensive products because it doesn’t leak. You can even use it to clean the toilet bowl.
Our top pick for bidet attachments is the TUSHY Spa 3.0, Self-cleaning and eco-friendly, this attachment can fit onto your existing round or elongated toilet seat. If you are looking for a non-electric option that is also easy to install, we recommend the OMIGO Element Non-Electric Bidet Attachment. It can be quickly fastened under your existing toilet seat without the need for a plumber or specialized tools.
What to Look for in a Bidet Attachment
Some bidet attachments have one nozzle with a wide spray pattern to clean as much as possible, while others feature two nozzles for adjustable coverage. If you opt for a single nozzle attachment, look for one with adjustable angles to make sure that you can position the water stream into a practical position. Also, take note of whether the nozzle is retractable and has antibacterial properties for sanitary purposes.
For a warm water option, look for a bidet attachment that offers temperature control. This will mean that the attachment has to be connected to the hot and cold water supply lines—which could mean running a water line to your sink. While choosing a bidet with only ambient water temperature may offer a more convenient set-up, some people prefer the option to use warmer water.
If you’re looking for more precise cleaning from a bidet, consider a model with a handheld attachment. It’s typical to see these attachments mounted to a wall near the toilet tank or on the toilet itself. Just remember to think about where you'll store your attachment and whether the cord is long enough to reach.
What is the difference between a bidet attachment and a bidet?
While a bidet attachment sits between your toilet seat and bowl, a regular bidet replaces an existing toilet seat altogether. Attachments usually offer water spray options, adjustable pressure, and some are even self-cleaning. Bidet seats, however, can come with more features like a heated seat or air deodorizers.
How do you clean a bidet attachment?
Generally, you'll want to stay away from harsh agents like bleach when cleaning your bidet attachment. Overusing cleaning products with high amounts of chlorine can potentially cause parts of your bidet attachment to fail because it can weaken O-rings and gaskets. To keep your bidet attachment as clean as possible, make sure to run the wash nozzle feature every day, this will run water over that area and clean it. You can clean your attachment more thoroughly using a damp cloth and a mild cleaning solution like dish soap or ammonia-free Windex. An old toothbrush can also be used to deep clean the inside of the nozzle hole.
How do bidet attachments work?
A simple bidet attachment will connect to your toilet water supply valve and be placed between the toilet seat and the toilet. Using the nozzle or remote control that came with your attachment, you can turn on the stream of water to rinse yourself off. There are some bidet attachments that are equipped with extra features to help control the angle, water temperature, water pressure, and more.
How do you install a bidet attachment?
To install a bidet attachment, first, you'll want to turn off the water supply on your toilet, and then drain the remaining water in the toilet by flushing (if this doesn't work, you will have to turn off the water supply to your house). Then remove your current toilet seat without damaging any of the screws and hardware.
Then disconnect the water supply hose from the toilet tank fill valve and connect the included T-valve in its place. It can be helpful to have a towel during this step since there may be excess water in the water supply hose. Once the T-valve is connected to your toilet, connect the water supply hose to the bottom of the T-valve and your bidet hose to the remaining side.
Now, take the bidet attachment and center the nozzle in your toilet bowl. Then you can align the holes on the top of the attachment with the bolt holes on the toilet. Once they are aligned, you can reattach your seat using its existing hardware.
Then connect the open end of the bidet hose to the cold water inlet on your bidet. Once finished, turn on the water supply valve slowly and check for leaks.
These steps assume that you are installing a bidet attachment that does not have a hot water function on a general standard two-piece toilet. If you have a bidet attachment with a hot water function, you will need to make sure you have a tube long enough to connect your bidet attachment to your under sink hot water supply valve.
Why Trust The Spruce?
This article was written by Anne Fritz, a freelance home writer with over 20 years of experience. Previously, she was an editor, and her work has appeared on several top publications. To make this list, she considered each attachment's nozzle type, temperature control, and handheld attachments.