Bumble Bee Craft Foam Visor

  • 01 of 08

    How to Make a Bumble Bee Craft Foam Visor

    How to Make a Bumble Bee Craft Foam Visor
    How to Make a Bumble Bee Craft Foam Visor.

    Find out how to create this fun bumble bee visor using craft foam and a few other supplies.

    • Age Guideline: 4 Years and Up
    • Time Required: 20 minutes

    The above age and time guidelines are estimates. This project can be modified to suit other ages and may take more or less time depending on your circumstances. For best results, read through all of these steps before you start making this craft.

    Let's begin.

    Continue to 2 of 8 below.
  • 02 of 08

    Gathering The Supplies to Make a Bumble Bee Visor

    Gathering The Supplies to Make a Bumble Bee Visor
    Gathering The Supplies to Make a Bumble Bee Visor.

    Before you start any project it is easiest to gather together all of the supplies. For this project you will need:

    Now we can start.

    Continue to 3 of 8 below.
  • 03 of 08

    Attaching the Bee's Eyes

    Attaching the Bee's Eyes
    Attaching the Bee's Eyes.

    Start out by gluing two wiggle eyes onto the edge of a yellow craft foam visor as shown in the photo.

    Continue to 4 of 8 below.
  • 04 of 08

    Cutting the Bee Stripes

    Cutting the Bee Stripes
    Cutting the Bee Stripes.

    Cut three strips from black craft foam. Each one should be about a half an inch thick.

    Continue to 5 of 8 below.
  • 05 of 08

    Gluing on the Stripes

    Gluing on the Stripes
    Gluing on the Stripes.

    Glue the stripes to the visor just above the eyes. Glue them far enough apart so you have fairly even black and yellow stripes for your bumble bee.

    Continue to 6 of 8 below.
  • 06 of 08

    Trim the Stripes

    Trim the Stripes
    Trim the Stripes.

    Use a pair of scissors to trim off the extra black craft foam so the edges are flush with the visor.

    Continue to 7 of 8 below.
  • 07 of 08

    Cutting Out the Bee Wings

    Cutting Out the Bee Wings
    Cutting Out the Bee Wings.
    Cut out two matching wing shapes from craft foam. I used gray but you can use whatever color you like.
    Continue to 8 of 8 below.
  • 08 of 08

    Gluing on the Wings

    Gluing the Wings onto the Craft Foam Visor
    Gluing the Wings onto the Craft Foam Visor.

    The final step in making your bumble bee visor is to glue the wings in place. Let the glue dry completely before you wear your new, fancy visor!