Complete Step by Step Directions to Change Jeans in to a Denim Skirt

  • 01 of 10

    Materials and Supplies List

    How to Convert Jeans in to a Denim Skirt
    Convert Jeans in to a Denim Skirt. Debbie Colgrove, Licensed to About.com

    Materials Needed

    • A pair of well-pressed jeans (This is a great project to use those jeans with tattered hems)-- Two pairs of jeans will be required for a long jeans skirt. Two pairs may also be needed if you want to add wedges to the side seams to flare the finished skirt.
    • A Seam Ripper
    • A sewing machine
    • Thread -- You can sew the seams in a thread that matches the denim but I prefer Coats Dual Duty Plus - Extra Strong For Jeans thread.
    Continue to 2 of 10 below.
  • 02 of 10

    Ripping Out and Cutting

    Ripping Out and Cutting
    Ripping Out and Cutting. Debbie Colgrove, Licensed to About.com

    To transform jeans into a jeans skirt you will need to remove stitching without ripping or tearing the fabric.

    • Lay the jeans flat on a table. Smooth from the waist until you run ‚Äčinto a spot where the crotch seam will no longer lay flat. Mark this spot with a pin. Turn the jeans over and do the same thing for the back seam, marking with a pin where the seam begins to curve.
    • Carefully remove the inseam stitching.
    • Remove the stitching from the crotch to the pin on the front and the back of the jeans.
    • T...MORErim the legs off of the jeans leaving ample length for a hem.
    • Lay the jeans flat and lay the crotch seam flat on the skirt, pinning it in place with the seam allowances turned under.
    Continue to 3 of 10 below.
  • 03 of 10

    The Wedge

    The Wedge
    The Wedge. Debbie Colgrove, Licensed to About.com
    • With the jeans still flat, use a piece of the leg to "fill in" the wedge opening. Rough cut this wedge of fabric to start.
    • Pay attention to the wedge fabric grain. In most denim, you can see the threads of the fabric. You want the threads to run vertical or perpendicular to the waistband.
    • Turn under the edge of the wedge on the underneath wedge edge so that the edge of the wedge matches the original seam line on the "leg"
    • Pin the wedge in place with the original seam allowances turned under.
    Continue to 4 of 10 below.
  • 04 of 10

    Start Sewing the Wedge

    Start Sewing the Wedge
    Start Sewing the Wedge. Debbie Colgrove, Licensed to About.com
    • Leaving the pins in place but removing them as you come to them, stitch the edge of the under neither (the side the crotch seam is facing) seam that will attach the wedge.
    • Reach under the upper layer as you sew the edge.Remove pins if you need to but lay the garment flat to replace the pins.
    • Never sew over pins! Remove them as you come to them.
    Continue to 5 of 10 below.
  • 05 of 10

    The Seam Allowance

    The Seam Allowance
    The Seam Allowance. Debbie Colgrove, Licensed to About.com
    • Go to the inside of the skirt and trim the seam so that it is just wide enough to be caught in the second row of stitching you will add to create a mock flat felled seam. (Check the spacing between the rows of stitching on the original seams.) On all of the jeans that I tried it required a 3/8" seam allowance.
    • Apply a seam finish to the trimmed seam.
    Continue to 6 of 10 below.
  • 06 of 10

    Create the Mock Flat Felled Seam

    Create the Mock Flat Felled Seam
    Create the Mock Flat Felled Seam. Debbie Colgrove, Licensed to About.com
    • Stitch the seam allowance in place by topstitching the second row of stitching to create the mock flat felled seam. Use a guide on the presser foot to keep your stitching straight and an even distance from the first row of stitching.
    Continue to 7 of 10 below.
  • 07 of 10

    The Curved and Long Seams

    The Curved and Long Seams
    The Curved and Long Seams. Debbie Colgrove, Licensed to About.com
    • Make sure that all the seams are laying flat and raw edges are turned under.
    • Stitch along the edge of the curved seam and the remaining flat seam.
    Continue to 8 of 10 below.
  • 08 of 10

    Seam Allowance

    Seam Allowance
    Seam Allowance. Debbie Colgrove, Licensed to About.com

    Working on the inside of the skirt, trim the seam allowance as you did for the first seam.

    Continue to 9 of 10 below.
  • 09 of 10

    Finish the Seam

    Finish the Seam
    Finish the Seam. Debbie Colgrove, Licensed to About.com
    • Be sure all seam allowances are pressed flat.
    • From the right side sew a second row of stitching to create a mock flat felled seam as you did on the first seam.
    • Repeat the wedge seaming process on the opposite side of the skirt. If desired, open the side seams and add a wedge to the seam to create more flare on the skirt.
    Continue to 10 of 10 below.
  • 10 of 10

    Hem the Skirt

    Hem the Skirt
    Hem the Skirt. Debbie Colgrove, Licensed to About.com
    • Try on the skirt and straighten the skirt hem edge.
    • Apply a seam finish such as zigzagging or serging the fabric edge. Many manufactured skirts have nothing more than a seam finish for the hem edge.
    • Optional: Turn the hem edge to the inside if desired and press well. Sew two rows of straight stitching to match the seam stitching.
    • Press the skirt well and wear with pride!