A Custom Bed Cover by Painting Fabric

  • 01 of 04

    A Custom Bed Cover by Painting Fabric

    Custome bedcover made with painted fabric
    Custom Fabric by Painting Fabric. Debbie Colgrove, Licensed to About.com

    The bed cover shown here was designed by my daughter and her dorm mate for their first dorm room experience. The girls had known each other for years and both have been involved with 4H so creativity is not something new to these girls.

    As they designed their dorm room, neither one of them saw what is "available" at the store as a limitation to have the room they could create. For example, a store bought bed skirt is usually around 13" long. The girls wanted to be able to set the dorm...MORE beds at their highest setting so that they could use the space under the beds for storage. Since they both have allergy issues making dust is a problem, our custom bed skirts enclose all four sides of the bed to keep as much dust at bay as possible. Using sheets as fabric was our most economical option to meet our fabric needs and have two matching skirts. By using three flat twin sheets from a box store the custom bed skirts cost under $15 each. Preshrinking the sheets before using them as fabric is essential for not only shrinking but also to remove and chemicals that will stop the paint from making full contact with the fibers. .

    These two girls have many things in common, including their first name but one of the places they differ is their favorite color and they actually dislike the color that is the other ones favorite so the decorating scheme became an exercise in compromise. Trying to find matching comforters that included both of their favorite colors turned out to be impossible. Our next step was to find comforters at a bargain price and then we would make duvet covers ... thinking that we would find a fabric with the colors we wanted, in a pattern they both approved... wrong...our next move became making our own fabric. Since the project took longer than we anticipated, the painted fabric became a bed cover and may sew them into duvet covers on their first vacation.

    Continue to 2 of 4 below.
  • 02 of 04

    Painting Fabric to Create Your Own Print

    Create Your Own Fabric Design
    The Painting Process to Paint Your Own Fabric Design. Debbie Colgrove, Licensed to About.com

    The girls wanted a bed cover that would have ALL of the colors they each like so that the other items in the room would blend in and nothing would be a "sore thumb". We did find one fabric that might have made what we had in mind but it was over eight dollars per yard and there was only two yards available. Our first stop was to obtain two twin flat sheets. We purchase white sheets so that our colors would be applied to a neutral background that would not change the colors by blending or...MORE bleeding through. As soon as we got home we used seam rippers to remove the large header hem and preshrunk the sheets. Our next stop was the acrylic paints at our local Joann's Fabric and Crafts. We choose the colors and two do two twin size sheets we needed 5 bottles of each of the eight colors. (40 two oz. bottles or 80oz. of paint) We also needed enough textile medium to meet a two parts of paint to one part of fabric medium ration. (40 oz.of medium)

    Textile Medium is needed to transform acrylic paint into permanent, flexible and washable paint. Always follow the directions on the product you choose.

    Joann Fabrics and Crafts offered their own Craft Essentials Acrylic Paint which met our of color needs. They also offer a textile medium but after a bit of experimenting we chose to work with Delta Creative Ceramcoat Clear Textile Medium. Shop at Joann.com

    For this project, along with the paint and medium described in the previous step, we also needed two sheets of stencil material, temporary basting spray to hold the stencil in place, paint pens (listed fabric use on the label), a drop cloth or large sheet of plastic to protect the work surface, a vanishing pen to mark lines, painters tape to mask off the lines and a small roller with the smallest nap you can find. A rotary ruler proved very handy for making the lines.

    The Painting Process:

    • Lay out the drop cloth or sheet of plastic on a surface large enough to protect your work surface. If you are using a sheet of plastic under a sheet, make sure the plastic is as large as the sheet as the paint bleeds through the plastic and will transfer to the back of the sheet if you attempt to just slide the sheet around on the plastic.
    • Decide on your design and mark the design. For the design shown we marked lines 5" apart starting at one corner of the sheet using the 45 degree line on the ruler as a guide. (Fair warning- working on the bias grain of the fabric requires patience as the bias grain does stretch and warp as you pain. You must use care to keep the grain lines straight.)
    • The next step is to tape the lines. We found it easiest to tape inside every other line so that we could fully paint every other line. After the paint dried we re-taped so we could go back and paint the un-painted sections.
    • Mix the paint and textile medium as directed on the package.
    • Slowly and as evenly as possible roll out the paint to fill each section. Retouch as needed but keep the paint as even as possible to have a consistent color. The more paint you use, the greater the likelihood that the fabric will be stiff.
    • After the first painted lines are dry, re-tape and paint the remaining lines.
    Continue to 3 of 4 below.
  • 03 of 04

    Stenciling a Design on Fabric

    Using Stencils on Fabric
    Painting Stencils on Fabric. Debbie Colgrove, Licensed to About.com

    Once all of the lines were painted, I suggested that we sew black ribbon on each intersection to divide the lines and to add the black color that the girls had chosen for their bed skirts. I learned they had a diamond design in mind and wanted diamonds on their bed coverings. SO we created stencils. We did attempt rolling the paint on over the stencil and we attempted pouncing to fill in the stencils but we all choose the paint pen as the best way to obtain sharp lines. We also covered the...MORE dining room table by taping garbage bags in place to have a hard work surface that we could sit down at to do all of the diamonds.

    Stenciling Process:

    • Mark the design on the stencil material and cut out the design.
    • Spray the back of the stencil with temporary basting spray and allow the spray to dray. You may have to re-spray the stencil as you work but repeat sparingly to prevent a build up that is apt to come off on to the fabric, leaving a gummy mess.
    • Apply the stencil where you want the design and apply pressure to adhere it to the fabric.
    • Fill in the design with your chosen material.
    • Repeat as needed to finish the design.
    Continue to 4 of 4 below.
  • 04 of 04

    Heat Setting Fabric Paint

    Always follow the directions on the product you are using!

    For the bed cover we made, we were instructed to heat set the paint for 20 seconds using a press cloth. Doing an entire twin sheet making sure to press every area for 20 seconds is a time consuming job but an important step to assure that the paint is set into the fabric and be permanent.

    While heat setting the two twin sheets, I covered our ironing board with unbleached muslin and used large pieces of unbleached muslin as a pressing cloth....MORE As the fabric became "tainted" with colors from the paint, I replaced it.

    Heat Set Pointers:

    • Allow the paint to dry for 24 hours or longer before heat setting the paint.
    • Cover the ironing board and use a press cloth to protect the iron and ironing board.
    • The press cloth also prevents the iron from smearing the paint, maintaining sharp lines.
    • Allow the paint to cure for a couple of weeks or longer before laundering the painted fabric.
    • Take your time and heat set the entire item... no matter how bored you may get!