Do I Need to Use Distilled Water In My Soap Recipes?

Is Tap Water Just Fine?

Ingredients and Tools for Soap Making
The Ingredients and Tools for this Batch of Soap. David Fisher

A new soapmaker recently wrote:

“I recently relocated to the UK and the water here is much harder than what I was used to in the US. Do you know how this may affect cold process soap? Would you have any particular tip for dealing with this before I attempt my first batch? Not sure if buying distilled water is easy here... but I used tap water usually.”

That's a great question - and one that folks often wonder about.

One of the best bits of advice I've heard for whether tap water is good enough to use in soap making is “if your water is good enough (soft enough) to use your soap in (i.e. it lathers well enough, it rinses well enough)…then it should be fine to make your soap with.”

Hard water can cause soap “scum” to form –(more information about the chemistry of soap scum here), but you’re going to have that problem with any real bar of soap. (Less so with detergent bars.) Your water would have to be really hard to cause so much trouble as to not be able to use it in your soap recipes - and the rinsing problem comes with really soft water, not hard.

So, the quick answer is – you should be just fine with tap water.

My Experience

I started out using distilled water in my batches soap. I read it in a book – and took it for the truth. I used distilled water in my soap for many years. Then, one day I ran out of distilled water...and had to make a batch of soap.

I used my tap water…and the soap came out just fine. My water here in Dallas is considered "moderately hard" with "80-100 parts per million" on the hardness scale. For about 10 years now, I’ve been using just tap water, and haven’t had any problems.

So Why/Why Not Use Distilled Water in Your Soap Making?

  1. PRO - Using distilled water is consistent. By using distilled water in your soap making, you know that you aren’t add anything that could possibly cause any problems with your batch of soap. Because the water is just that…only distilled water…you know exactly what you’re putting into your recipe. While I've never had any problems myself, I've read where people have felt that trace amounts of metals in the water have contributed to DOS in their soap.
  2. PRO - Soap made with distilled (or rain) water can be marketed as “pure”. I’ve seen soap labels that use the phrases “made with distilled water”, “made with purified water”, and even “made with rain water.” Naturally (no pun intended) these sound nicer than “made with plain old water from my kitchen sink.” Is soap made with purified, rain or distilled water any better? Probably not. Will it sell better? That depends on your clientele.
  3. CON - It costs money. While not super expensive, using distilled water does add cost to your batch of soap. You’ll have to decide where you want to spend your money on ingredients.
  4. CON - It's one more ingredient to keep on hand. If you're trying to keep your soap supplies to a minimum, or are trying to keep your inventory lean, it may be an ingredient you can do without.

    Do a few tests if you can. Make a batch with tap water and the exact same batch with distilled water. After curing for several weeks (I'd recommend 4-6), test them out. You may be surprised by how much or how little difference there is.