DIY Embroidered Felt Coasters

  • 01 of 06

    Embroider Coasters With a Favorite Motif

    Easy Embroidered Felt Coasters
    Easy Embroidered Felt Coasters. Mollie Johanson

    Whether you're enjoying a warm wintery beverage or something cool and refreshing, coasters are always useful. And when you make them by hand and add some embroidery, they become extra special. These stitched felt coasters come together quickly and make a great last-minute gift for a friend (or yourself!).

    Any small embroidery pattern will work with this project, so you can choose something that suits your style. The snowflake mug in the sample is from the free Holiday Minis pattern set. Simple...MORE snowflakes would be another good option for winter coasters, or you might make them with an embellished monogram.

    It's usually easiest to plan ahead and work the embroidery specifically to fit a project like this. However, if you like stitching small designs, there's a chance you already have the embroidery all ready to start making your first coaster!

    Gather your supplies and get ready to make a set of stitched coasters!

    Continue to 2 of 6 below.
  • 02 of 06

    Coaster Supplies and Getting Started

    Cut the Felt, Batting & Embroidery
    Cut the Felt, Batting & Embroidery. Mollie Johanson

    Supplies

    Wool blend felt
    Thin fusible batting (or thin batting + fusible web)
    Small finished embroidery
    Embroidery floss
    Scissors
    3-inch embroidery hoop
    Pen or pencil
    Iron
    Fabric glue
    Pins
    Needle

    Getting Started

    For each coaster, cut two 4-inch squares of felt. Cut one 3.5-inch square of fusible batting. Cut the completed embroidery into a 3.5-inch square with the embroidery centered in the square.

    If you're using regular batting and fusible web, cut 3.5-inch squares of each of these. 

    Continue to 3 of 6 below.
  • 03 of 06

    Cutting the Front Coaster Piece

    Trace a Circle for the Front Opening
    Trace a Circle for the Front Opening. Mollie Johanson

    To make the cut out portion of the front piece of felt, remove the inner ring of a 3-inch embroidery hoop. If you don't have one handy, find an object of a similar size to use as a template. 

    Center the hoop ring on one of the felt squares and trace the inside of the ring. This will give you a circle that's about 2.75in.

    Fold the felt to start cutting, then cut out the circle.

    Continue to 4 of 6 below.
  • 04 of 06

    Fusing and Gluing the Pieces

    Glue the Front to the Embroidered Piece
    Glue the Front to the Embroidered Piece. Mollie Johanson

    Following the manufacturer's instructions, fuse the batting to the back of the embroidered square. If you're using plain batting and fusible web, sandwich the web between the embroidery and batting and fuse the layers. Use care when ironing the embroidery. 

    Place the embroidered piece (with batting) in the center of the solid felt square. 

    Run a thin line of fabric glue around the circle opening on the back of the front felt piece. Carefully place the glued felt down around the embroidery, making...MORE sure that it doesn't touch the fabric until it's in the right place. Use the back felt piece as a guide for placement.

    Gently press the felt down so it adheres to the fabric and let the glue set up for about 15 minutes (or longer if the glue you are using sets up slower).

    Continue to 5 of 6 below.
  • 05 of 06

    Stitching the Coaster Layers

    Stitch Around the Edges
    Stitch Around the Edges. Mollie Johanson

    Pin the layers together so they don't shift.

    Stitch around the edge of the coaster with three strands of either matching or coordinating embroidery floss. Use running stitch, blanket stitch or another favorite that will hold the layers in place.

    Be sure to hide the starting and ending knots between the layers of felt. Remove the pins as you make your way around the edges so the thread doesn't continue to catch on the pins.

    Continue to 6 of 6 below.
  • 06 of 06

    Make a Matching Set of Coasters

    Embroider a Coaster Set as a Gift
    Embroider a Coaster Set as a Gift. Mollie Johanson

    Once you've made one coaster, it's time to make enough for a set! Each coaster can be the same, or choose a group of motifs to make a set. The felt doesn't even need to be the same color for each. You might want a rainbow of coasters!

    Giving a set of coasters as a gift? Pair them with some mugs or a bag of coffee. 

    If a coaster is a little small for your mug and a sweet snack, try altering the size to make a mug rug or a trivet!

    Happy stitching!