DIY Embroidery Scissors Tassel Charm

  • 01 of 06

    Give Your Scissors Some DIY Charm

    DIY Tassel Scissor Charm
    © Mollie Johanson

    Scissor fobs or charms have been around for a long time, and are often used to distinguish scissors from one another (a problem when a group of stitchers gather!). Even if you only ever embroider by yourself, you'll find that this DIY tassel charm makes a nice addition to your embroidery scissors.

    One helpful feature of having a fob on your scissors is that it make them easier to find. Have you ever had your little scissors slip between the couch cushions or blend in with the area you're...MORE working? A brightly colored tassel is hard to miss!

    Not to mention, an accessory like this can be an expression of yourself. And it's so fast to make, you might just decide to make several so you can change change up the look of one of your most used embroidery tools.

    The best part is, you already have all the materials you'll need for this project!

    Continue to 2 of 6 below.
  • 02 of 06

    Scissor Charm Supplies and Getting Started

    Wrap the Floss Around Three Fingers
    © Mollie Johanson

    You will need:

    Embroidery floss (Yes, that's all!)

    Get started:

    Cut off two 8in pieces of embroidery floss and set them aside.

    Begin wrapping embroidery floss around three fingers held together as shown. Don't wrap it too tight, but try to keep an even tension. Wrap the floss 30-35 times around. 

    TIP: If your embroidery floss has kinks or folds in it from the skein or a bobbin, give it a quick ironing along the whole length so that your tassel will hang nicely.

    Continue to 3 of 6 below.
  • 03 of 06

    Forming the Tassel

    Tie the Wrapped Floss
    © Mollie Johanson

    Slide the wrapped thread off your fingers, keeping it as neat as possible. 

    Slip one of the 8in pieces of thread in the wrapped floss and tie it off with a doubled or tripled knot. Make it tight and secure, and try to keep the ends of the thread fairly even.

    Tie an overhand knot in the two ends of the floss, about 1-1/2 to 2 inches from the top of the tied tassel. Trim the ends.

    Continue to 4 of 6 below.
  • 04 of 06

    Tying the Tassel

    Wrap and Tie Around the Tassel
    © Mollie Johanson

    Take the other 8in piece of embroidery floss and wrap it around the tassel about 1/2 inch from the knotted top. Wrap it around several times so it is tight and then tie the ends with a double knot. 

    For extra security, you can add a dab of fabric glue to the knot, but that's optional. 

    Trim the ends close enough that they aren't sticking out, but not so close that you risk the knot coming undone.

    Continue to 5 of 6 below.
  • 05 of 06

    Trimming the Tassel

    Trim the Tassel Ends
    © Mollie Johanson

    Slide a sharp pair of sewing scissors through the loops at the bottom of the tassel and cut straight across.

    Then, trim the ends so they are all even. This gets a little messy, so you may want to do this over a trash can.

    Continue to 6 of 6 below.
  • 06 of 06

    Adding the Tassel to Your Scissors

    Slip the Tassel Charm on the Scissors
    © Mollie Johanson

    To use your tassel charm, slip the loop of thread through the handle of your scissors, then bring the tassel through the loop, forming a cow hitch knot.

    The fob will hold tight to your scissors and add simple charm to your embroidery tool basket.

    These tassels can be used on other items as well, such as on a zipper pull, or even attached to the button closure on the DIY Project Pouch

    They're so fast and easy to make, you might even want to try making a few with some specialty threads, such as...MORE metallics, perle cotton, floche, or wool.