How to Sew A Fabric Baby Grab Ball

  • 01 of 06


    Playing is fun with a ball a baby can hold on to
    An Adorable Baby Toy Ball Being Played With. Melissa Kadinger, Licensed to

    Baby toys are big business and can cost a small fortune. This free pattern will make a ball that uses up your smallest fabric scraps and is easy for small hands to grab and hold. I am including two pattern sizes, as the smaller one is perfect for tiny hands, but not as plump as the type many of us are familiar with.

    Always remember you are making a toy for a small child which will most likely end up in the child's mouth. It is important to make sure all stuffing is firmly enclosed and all...MORE parts are attached in an indestructible way!

    Materials Needed

    • Fabric scraps
    • Thread for sewing the sections
    • Dental Floss or very strong thread such as button and carpet thread to connect the sections
    • Stuffing
    • Print out of pattern
    Continue to 2 of 6 below.
  • 02 of 06

    Cutting & Joining the First Two Sections

    Joining the first two sections
    Joining the first two sections. Debbie Colgrove, Licensed to
    • Trace pattern onto Poster board or gift box weight cardboard. Cut out to use as a template.
    • Cut 36 pieces of fabric, using your template to trace onto the fabric. In the example seen on this page, I used 3 different fabrics, cutting 12 of each print.
    • You will be making 12 sections, each comprised of three pieces of fabric.
    • With right sides together, join two pieces as shown in​ the diagram, using 1/4" seams. Stitch just between the dots, leaving the 1/4" seam allowance at the ends open.
    Continue to 3 of 6 below.
  • 03 of 06

    Press & Open

    Open for two new edges
    Open for two new edges. Debbie Colgrove, Licensed to
    • Press the seam as it was sewn.
    • Open the two sections so that you now have two new "sides"
    Continue to 4 of 6 below.
  • 04 of 06

    Second Seam

    Adding the third section
    Adding the third section. Debbie Colgrove, Licensed to
    • Line up your third piece of fabric by matching the edges to the edge of one of the pieces you already joined together.
    • Sew one side edge together, using 1/4" seams.
    • Stitch to the dot again, being sure to match up to your previous stitching.
    Continue to 5 of 6 below.
  • 05 of 06

    Final Seam Per Section

    Leave an opening for turning
    Leave an opening for turning. Debbie Colgrove, Licensed to
    • Sew the last side of the third piece the same way, leaving an unsewn area in the middle of the section to turn it right sides out.
    • Trim off ends of cylinder to blunt the ends and eliminate some of the bulk.
    • Turn Right sides out.
    • Repeat to create 12 sections.
    • Stuff each section to a semi-firm state.
    • Slip stitch each section closed. Use small, firm stitches.
    Continue to 6 of 6 below.
  • 06 of 06

    Join the Sections

    Join the stuffed sections
    Join the stuffed sections. Debbie Colgrove, Licensed to
    • Using 4 sections at a time, using Dental floss for strength, join end to end to create a circle.
    • Join two circles, vertical to each other, again using the dental floss to create strong stitches.
    • Join the third circle to the middle part of the other two joined circles.
    • Double check all your stitches to make sure there are no loose stitches anywhere on the toy.