Field of Diamonds Scrap Quilt Pattern

  • 01 of 09

    How to Make the Field of Diamonds Scrap Quilt

    Sixteen Patch and X Quilt Variation
    Sixteen Patch and X Quilt Variation. Janet Wickell

    Create a Contemporary or Traditional Scrap Quilt

    Field of Diamonds is an easy scrap quilt pattern designed with a combination of two traditional quilt blocks, the Sixteen Patch block and a block most commonly called X, even though it's known by other names. 

    A patchwork border extends beyond the outer blocks to continue the peaked extensions that are connected to the sixteen patch quilt blocks.

    The quilt finishes at about 56" x 72". Increase its size by adding one or more borders to the...MORE quilt or by sewing additional quilt blocks.

    Quilt Construction Options

    Pattern designers have written several variations of this type of traditional quilt layout, which looks complicated at first glance but is really quite simple to construct. My pattern includes a couple of different options to help you make the best use of existing fabrics.

    Take a look at the last three pages of the pattern to see slightly different versions of the quilt. One is made with less patchwork in the border, another illustrates the quilt if you swapped the light background with black, and the third shows how the quilt would look if blocks change position in the layout.

    Choose Fabrics for the Scrap Quilt

    My example quilt has a white background. I do recommend that you use the same background throughout the quilt to provide a constant backdrop, but the color needn't be white. You might choose to change color value (contrast) entirely and sew with a very dark background as shown on page 8.

    This quilt is very scrappy but you can create a theme. You could even choose light to dark fabrics of the same color to create a monochromatic quilt.

    You might opt to sew the quilt over time, accumulating the blocks or pieces for blocks as leftover fabrics are available. Scrap quilts are all about variety so don't obsess over color and color value placement when you sew components together. Work with a variety of fabrics and throw a bit of black into the mix to add depth.

    Take Care when Cutting and Sewing

    No matter how you construct them, the Sixteen Patch blocks have lots of seams. That means you must use an accurate quarter inch seam allowance or your blocks will be too small (typical) or too large (less likely).

    Why are seam allowances important? Because the Sixteen Patch blocks sit right next to X blocks with far fewer seam allowances, making the X blocks less likely to be off-sized or skewed. Test your seam allowance and you might find that you need to sew Sixteen Patch block with a 'scant' (narrower) quarter inch seam.

    Cut carefully and press and measure as you work so that all blocks and the patchwork border fit together just as they should when it's time to assemble the quilt.

    Quilting Fabrics and Other Materials

    It's difficult to calculate exact yardages for a scrap quilt because each quilter works with scraps of different sizes. I can give you an estimate for the colorful fabrics used in the quilt but treat it as just that -- an estimate.

    Color Fabrics for Quilt Blocks

    • If the colorful fabrics in each block are identical you would need about 4 yards. Use that figure as a guide when searching for scraps in your fabric stash. If you're short, consider buying fat eighths or fat quarters to accumulate a variety of fabrics.

    Background Fabric for Blocks and Patchwork Border

    • 4 yards

    Backing

    • A panel about 66" x 72" or as required by the quilter if you are sending it out to be quilted. Yardages vary depending on backing configuration. Learn how to make quilt backing.

    Quilt Batting

    • A panel about the same size as the backing.

    Quilt Binding

    • About 285 running inches of continuous doublefold binding to finish at 1/4". Since the quilt has a border on its outer edges you could use a wider binding but take care to follow correct mitering instructions for binding sewn to the quilt with a wider seam allowance.
    Continue to 2 of 9 below.
  • 02 of 09

    Make the X Quilt Blocks

    Make X Quilt Blocks
    Make X Quilt Blocks. Janet Wickell

    Cutting for 31 X Quilt Blocks

    • Cut (124) 4-1/2" x 4-1/2" background squares.
    • Cut (248) 2-1/2" x 2-1/2" colorful squares
    • I recommend that you cut enough squares to make one or two test quilt blocks before cutting all of your fabric.
    • Learn how to cut patchwork shapes.

    Sew the Quilt Blocks

    Each X quilt block is made up of four quick pieced patchwork units. Follow the diagrams left to right and top to bottom as you work.

    1. Draw a line from one corner to the opposite corner on the reverse side of each...MORE 2-1/2" x 2-1/2" square.
    2. Position a marked square in one corner of a larger square, right sides together, with the marked line as illustrated. Make sure the edges of both fabrics match. Secure with a straight pin if necessary.
    3. Sew a seam directly on the marked line. Trim with scissors or a rotary cutter, leaving about 1/4" for a seam allowance.
    4. Repeat on the opposite diagonal with another small square.
    5. Press as is to set the seams.
    6. Carefully press the seam allowances towards the new triangles.
    7. The square should still measure 4-1/2" x 4-1/2".
    8. Create three more squares, but use an assortment of colorful fabrics.
    9. Arrange the four squares into two rows -- color triangles should meet as shown.
    10. Sew components of each row together.
    11. Press to set the seam and then press allowances in adjoining rows in opposite directions.
    12. Join the rows. Press the quilt block. It should measure 8-1/2" x 8-1/2". If it does not, check your pressing and cutting to determine why.
    13. Repeat all steps to sew a total of 31 X quilt blocks.

    Use chain piecing to speed up assembly after you've determined that units and blocks are accurate.

    Continue to 3 of 9 below.
  • 03 of 09

    Make the Sixteen Patch Quilt Blocks

    Sew Sixteen Patch Quilt Blocks
    Make Sixteen Patch Quilt Blocks. Janet Wickell

    Options for Sixteen Patch Quilt Block Assembly

    The Sixteen Patch quilt blocks can be assembled in several ways. Refer to the illustrations.

    • Sew (16) 2-1/2" squares together individually, making four rows of four squares each to create a block. You would need (512) 2-1/2" x 2-1/2" squares to sew all blocks from individual patches.
    • Sew four 2-1/2" wide strips of fabric (any length) side by side to create a strip set and then cut 2-1/2" segments from the set to create multiple...MORE rows.
    • Combine the two methods. Let's say you have three strips of fabric you'd like to use in a strip set. Sew the strip set and cut segments. Sew a 2-1/2" scrap square to one end of each segment to make the rows.
    • Any combination of strips sets and individual squares will work just fine as long as you remember the 2-1/2" dimension.

    Create 128 rows of patchwork to create 32 Sixteen Patch quilt blocks. Each completed row should measure 2-1/2" x 8-1/2". Each completed quilt block should measure 8-1/2" x 8-1/2".

    Sewing Strip Sets

    It's fine to use a variety of 2-1/2" wide strips of fabric cut from selvage to selvage. Each strip set made from fabrics of that length would allow you to cut about (16) 2-1/2" segments. Avoid repeating like segments within the same block so that the duplication isn't noticeable.

    Another option is to sew two 2-1/2" wide long strips together to make a long strip set and then cut 2-1/2" segments. Add two individual 2-1/2" squares to the segment.

    Work with the fabrics you have on hand to create 32 scrappy quilt blocks from (128) segments/rows.

    Important Things to Remember

    • Make a few test blocks and check their size before cutting all of your fabric. Completed blocks should measure 8-1/2" x 8-1/2".
    • Beginners should read Strip Piecing Tips for Quilters.
    • Square up one end of each strip set before cutting 2-1/2" segments.
    • Ideally, seam allowances in adjacent rows should be pressed in opposite directions to make it easier to match the intersections. That probably won't be possible so match and pin the intersections before sewing.
    • Use a design wall to preview blocks before sewing rows together.
    Continue to 4 of 9 below.
  • 04 of 09

    Assemble the Field of Diamonds Quilt Top

    Field of Diamonds Quilt Layout
    Field of Diamonds Quilt Layout. Janet Wickell

    Arrange the Quilt Blocks

    The quilt is illustrated in landscape mode -- on its side. Print the image and flip it around if you prefer to visualize and work with shorter rows.

    Make sure all blocks measure 8-1/2" x 8-1/2" before you begin. If some do not, try one of my easy ways to fix problem quilt blocks before sewing them into the quilt.

    Use a design wall or other flat surface to arrange blocks if possible.

    1. Create seven rows for the quilt as shown above. Each row contains nine quilt blocks.
    2. Alternate...MORE block types from side to side and row to row. Rows 1, 3, 5, and 7 begin and end with a Sixteen Patch block. Remaining rows begin and end with an X quilt block.
    3. Join the blocks in each row.
    4. Press new seam allowances in opposite direction from row to row to make block intersections easier to match.
    5. Sew the rows together. Use pins to match and secure rows before sewing.
    6. Press the quilt top.
    Continue to 5 of 9 below.
  • 05 of 09

    Assemble the Patchwork Border

    Quick Pieced Patchwork Border
    Quick Pieced Patchwork Border. Janet Wickell

    Cutting for the Patchwork Border

    Background Fabric

    • (68) 4-1/2" x 4-1/2" squares

    Colorful Fabrics

    • (64) 2-1/2" x 2-1/2" squares
    • Repeat some squares if you wish but try to make the assortment as scrappy as possible.

    Sew the Patchwork Border

    1. Draw a diagonal line on the reverse side of each small square, just as you did to make X blocks.
    2. Use the same quick piecing technique to sew one small square to one corner of 64 larger squares.
    3. Set the seams, trim, and press the triangle right side up as before.
    4. Set...MORE aside, along with the four remaining larger squares.

    You could work with (mostly) rectangles to create the border but single patches sewn to individual squares offer more layout options when you design the quilt.

    Continue to 6 of 9 below.
  • 06 of 09

    Add the Patchwork Border and Finish the Quilt

    Field of Diamonds Quilt with Border
    Field of Diamonds Quilt with Border. Janet Wickell

    Sew the Border Strips

    Refer to the illustration.

    1. Sew two borders of eighteen 4-1/2" patchwork border squares. Twist squares around to form the peaks illustrated. 
    2. Press seams between border squares to best match the quilt.
    3. Sew each long border to the quilt as you would any other border, by matching and pinning endpoints and midpoints first and then matching and pinning remaining areas.
    4. Press seam allowances either direction.
    5. Sew two more borders, each with fourteen 4-1/2" patchwork border...MORE squares. Sew a plain 4-1/2" background square to each end of each short border.
    6. Press as before and sew to the remaining sides of the quilt.

    Finish the Quilt

    1. Mark for quilting if necessary.
    2. Sandwich the quilt top with batting and backing.
    3. Baste the quilt and quilt.
    4. Trim excess batting and backing, carefully squaring up corners and sides if they've become just a bit distorted.
    5. Sew easy mitered binding around the edges of the quilt.

    Continue to 7 of 9 below.
  • 07 of 09

    Variation of the Field of Diamonds Quilt

    Sixteen Patch and X Quilt Pattern
    Sixteen Patch and X Quilt. Janet Wickell

    This variation of the quilt does not include the extra border patchwork needed to connect with the outer X quilt blocks.

    Continue to 8 of 9 below.
  • 08 of 09

    Field of Diamonds with Black Background

    Field of Diamonds Quilt with Dark Background
    Field of Diamonds Quilt with Dark Background. Janet Wickell

    The quilt's appearance changes dramatically when you replace all light background pieces with black or another very dark fabric.

    This version of the quilt is reminiscent of a Jewel Box quilt.

    Continue to 9 of 9 below.
  • 09 of 09

    Reverse the Quilt Blocks for a Completely Different Look

    Reverse Diamonds Quilt
    Reverse Diamonds Quilt. Janet Wickell

    Here, the quilt block arrangement is reversed, with X blocks and Sixteen Blocks swapping places. A 5" border increases the quilt's size.

    Make one additional X quilt block if you'd like to preview this type of layout.