Sew a Removable Money Hiding Bra Pocket

  • 01 of 05

    Gather Materials to Sew a Removable Money Pocket For Your Bra

    A photo of a finished removable money hiding bra pocket.
    A Finished Removable Money Hiding Bra Pocket. Debbie Colgrove, Licensed to About.com

    This pocket makes a safe secure place for you to hide large bills when you are traveling. The removable feature allows you to move the pocket to a different bra when you change your clothes without marring your bra.

    Gather The Materials

    • A 3" by 4" scrap of soft light weight fabric.
    • A 3" piece of 1/4" wide ribbon (Wider bra straps may require a longer piece of ribbon)
    • A small sew on snap
    Continue to 2 of 5 below.
  • 02 of 05

    Start Sewing

    A photo of the serged edge and seams sewn on a removable money hiding bra pocket.
    Serged top edge and sewn seams. Debbie Colgrove, Licensed to About.com

    Clean finish or serge one 4" edge.

    Fold the finished edge in half, right sides together and match all the edges.

    Sew a 1/4" seam on the two un-sewn edges.

    Continue to 3 of 5 below.
  • 03 of 05

    Trim The Seam & Apply a Seam Finish

    A photo of the seams trimmed and a seam finish applied to sew a removable money hiding bra pocket.
    Trimmed seams with a zigzag seam finish/. Debbie Colgrove, Licensed to About.com

    Trim the seam and sew a zigzag stitch to enclose the raw edges of the fabric.

    Continue to 4 of 5 below.
  • 04 of 05

    Attach The Ribbon

    A photo showing the ribbon attached to the removable money hiding bra pocket.
    Attach the Ribbon. Debbie Colgrove, Licensed to About.com

    Turn the pocket right side out and attach one end of the ribbon on the seam at the top of the pocket. Use a zigzag stitch with a shortened stitch length to achieve a secure hold.

    Continue to 5 of 5 below.
  • 05 of 05

    Sew On The Snap

    A photo showing the snap placement to sew a removable money hiding bar pocket.
    Snap Placement. Debbie Colgrove, Licensed to About.com

    Sew one-half of the snap onto the pocket over the area you attached the ribbon to the pocket

    Place the pocket in the bra cup and bring the ribbon around the bra strap.

    Mark where the ribbon crosses over the snap.

    Turn under the free end of the ribbon to enclose it under the snap marking and sew on the other half of the snap.