Pumpkin Pillow Pattern

  • 01 of 10

    A Stuffed Fabric Pumpkin for Decorating Your Home

    Stuffed Pumpkin Pillows
    Mollie Johanson

    This free pillow pattern creates a pumpkin that will allow you to decorate for  Halloween and Thanksgiving. There are two sizes available and you can use plain or calico fabric, or even mix the two. Create an entire pumpkin patch by using various orange prints!

    Being familiar with soft sculpture techniques will help you create these pumpkins but they are also a great way to experience how soft sculpture transforms a stuffed item. And as you can see, there will be some variations in sizes and...MORE shapes due to how the "pumpkin" is stuffed or pieced. 

    Continue to 2 of 10 below.
  • 02 of 10

    Pumpkin Pillow Materials

    Pumpkin Pillow Supplies
    Mollie Johanson
    • Orange fabric (calico or plain orange) - 1/2 yard will yield a large and a small pumpkin
    • Orange thread
    • Poly-fill or stuffing (the better quality stuffing gives you a smoother finished project.)
    • Orange embroidery thread or perle cotton
    • Green fabric (calico or plain green)1/4 yard
    • Green Thread
    • Very strong thread or button and carpet thread
    Continue to 3 of 10 below.
  • 03 of 10

    Cutting Pumpkin Pattern Pieces

    Cut the Pumpkin Pieces
    Mollie Johanson

    Download the small pumpkin pattern or the large pumpkin pattern. Print the JPG pattern pages at full page size.

    The small pumpkin section should measure about 8" long and the large pumpkin section should measure about 11" long, however, the sizes don't need to be precise.

    Cut eight sections of the pumpkin body piece. These may be cut on the lengthwise or crosswise grain of the fabric. They must be cut on a straight grain to avoid the pumpkin twisting.

    Cut two pieces of the stem.

    All...MORE directions refer to using 1/4" seam allowances.

    Continue to 4 of 10 below.
  • 04 of 10

    Pumpkin Body Assembly

    Sew the Pumpkin Sections Together
    Mollie Johanson

    Begin by joining two pumpkin sections, wrong sides together, on one edge. Be sure to back stitch at the ends. The seams will come apart when you are stuffing it if you do not back stitch.

    Open the joined section and join another pumpkin body section to one side.

    Repeat the above step until all sections are joined together. Join the two ends together to form a ball. One end of the ball will be closed and the other will have an opening for you to stuff through. Check that the bottom of the pumpkin...MORE is sewn closed completely.

    Continue to 5 of 10 below.
  • 05 of 10

    Stuffing the Pumpkin

    Fill the Pumpkin With Stuffing
    Mollie Johanson

    Turn the fabric to the right sides out.

    Stuff the pumpkin. It should be semi-firm, with some give but still firm to a light touch.

    To obtain a smooth exterior on the pumpkin, add the stuffing in small pieces, starting at the center and working the stuffing out to the sides.

     

    Continue to 6 of 10 below.
  • 06 of 10

    Closing the Opening

    Tie the Opening Closed
    Mollie Johanson

    Thread a needle with VERY strong thread. Leave a 6" tail on the thread by knotting (large knot) the thread at least 6" from the end. Make a running stitch around the top opening.

    Pull the thread to gather the opening closed. Tack the threads to tie it off and use the long tail to knot and anchor your stitches as you close it. This will be hidden under the stem so neatness is not imperative, but you do want to draw it tight so you can hide the stitches under the stem.

     

     

    Continue to 7 of 10 below.
  • 07 of 10

    Shaping and Sculpting the Pumpkin

    Wrap the Seams to Sculpt the Pumpkin
    Mollie Johanson

    Roll the ball on the floor or with your hands to smooth out the ball and obtain the basic shape that you want for a pumpkin. Try to roll out as many hollows as possible.

    Thread a large-eyed needle with 6 strands of embroidery thread or perle cotton. Tie off the embroidery thread where you pulled tight gathered the top closed. A tail on the thread is also helpful here.

    Wrap the embroidery thread around the seam lines on your pumpkin. Pull the thread tight, so that the seams indent and tie off after...MORE pulling over each seam. 

    Tie off and cut remaining tails of thread.

    Continue to 8 of 10 below.
  • 08 of 10

    Sewing and Attaching the Stem

    Sew the Stem to the Pumpkin
    Mollie Johanson

    Sew the two stem pieces together and turn right side out. Be sure to get the top point turned all the way out.

    Stuff to a semi-firm stage.

    Use straight pins to hold the stem in place on the top of the pumpkin, making sure that all of the stitches on the pumpkin are covered.

    Use a slip stitch to attach the stem.

    Continue to 9 of 10 below.
  • 09 of 10

    Enjoying Your Finished Pumpkin Pillow

    Finished Soft Pumpkin Pillow
    Mollie Johanson

    These pumpkin pillows look great paired with other autumn pillows on a sofa or overstuffed chair, and they also work for making a table centerpiece. They're even fun for kids to have a soft pumpkin to hug or snuggle with. 

    They don't take long to make, so you can grow a patch full of stuffed pumpkin pillows!

    Continue to 10 of 10 below.
  • 10 of 10

    Options for Making Your Pumpkin Pillow Extra Special

    Pumpkin Pillow With Optional Changes
    Mollie Johanson

    Adding a Pumpkin Face:

    Cut felt shapes, such as triangles, circles and a mouth to create a jack-o-lantern face. Spray the back of the felt with temporary basting spray and press in place on the pumpkin. Using the temporary spray allows you to also use the pumpkins for Thanksgiving decorations.

    For a more permanent face, use fusible web or a slip stitch to attach the face pieces. 

    To make a small and cute embroidered face like shown above, stitch the eyes with french knots and the mouth with fly...MORE stitch. You should do this on one of the panels before sewing them all together.

    Adding Leaves and Vines:

    Cut out a few felt leaves to attach near the stem. You can also add pipe cleaners to make curly vines.

    Use a small amount of hot glue to anchor the leaves.

    Shaping Options

    If you want your pumpkin to be taller and more round, use fewer pumpkin sections. The example above has seven sections instead of eight, but you could make yours with fewer still!

    You can add extra sculpted sections to your pumpkin by repeating the sculpting step evenly between the seam lines as well as on the seams. Or, skip the sculpting entirely for a different look.

    Updated by Mollie Johanson