How to Hem Jeans and Casual Clothing

Knowing how to hem jeans is different than hemming a skirt, dress or dress slacks. Jeans  and many casual garments have a narrow, turned under, visible hem which is easy to replicate with sewing machine and a little sewing experience. Most skirts, dresses and dress slacks have a one to two inch hem and the stitching that is holding the hem in place is pretty much invisible from the right side of the garment.

  • 01 of 05

    Before You Start

    Hem your own jeans
    Hemming Jeans. Debbie Colgrove, Licensed to About.com

    If these are brand new jeans, just as you would preshrink fabric before you sew it, wash and dry the jeans using the  method you will use to launder the jeans.  Your goal is to have all of the shrinking done before you hem the jeans.  NOTE: Lengthening jeans is different and you should prep the jeans before you begin by removing the hem before you shrink the jeans. Always prevent fraying before laundering and preshrink the trim or "facing" tape you will be adding to the jeans when you...MORE shrink the jeans. A basic sewing kit should help you finish this task.

    Gather these materials to hem your jeans:

  • 02 of 05

    Mark Your New Hem

    Shoes Make a Difference in Hem Length
    Shoes and Hem Length. Debbie Colgrove, Licensed to About.com

    Try on the  jeans and put on the type of shoe that you would normally wear with the jeans. The shoes should have the size heal and sole that you would normally wear with the jeans so they will end up the correct length for your shoes. More about Shoes and Pant Hems

    Most people want their jeans long enough to cover the shoes but you do not want them hem to drag on the ground or the material will wear away and leave a frayed mess.

    Stand up straight and have someone else mark the desired length.

    Stand...MORE a ruler on its end on the floor next to the pants leg. (Note: This same method can be used to mark jeans that you want to hem as shorts. Just use a yard stick rather than a ruler and mark all the way around the leg.)

    Placing a pin perpendicular to the ruler, mark the hem an even distance from the floor. 

    Work around the pants leg, keeping the end of the ruler on the floor and marking as you work around the leg.  (The area over the top of the foot will need to be placed after the jeans are taken off to keep a straight line but do as much as possible keeping the ruler on the floor.)

    Take off the jeans and turn the marked hem up.

    Try the jeans on again and be sure you are happy with the marked length. Repeat the process if you are not happy with the length.

  • 03 of 05

    Prepare the Hem

    Prepare the Hem in Jeans
    Prepare the Jeans Hem. Debbie Colgrove, Licensed to About.com

    Place the straight pins in the fold line of the hem. Place as many as needed to securely mark the hem fold. If you will be using the fabric that is in the existing hem (the existing hem is within an inch of your marked hem line) remove the existing hem and press the fabric perfectly flat.

    Be sure any side seam allowances,- that are not flat felled seams, are pressed in the same direction that they are at the waistband.

    Mark one inch from the hem fold line, toward the bottom of the jeans leg....MORE Recheck this measurement to be sure you are accurate.

    Cut the excess material off at the newly marked 1" line using sharp fabric scissors so that you obtain a clean crisp cut without fraying the fabric.

  • 04 of 05

    Replace the Hem

    Turning the Jeans Hem Under
    Turning the Jeans Hem Under. Debbie Colgrove, Licensed to About.com

    Fold up 1/2" of fabric, bringing the wrong sides of the fabric together and the raw edge up to the marked hem line inside the pant leg. Press very well.

    Fold the 1/2" up again enclosing the raw edges. This should now leave the marked hem line at the bottom of the pant leg.

    Press the new hem very well using any pressing tools needed to create strong, crisp pressed folds. Use a press cloth to prevent causing a "shine" on the fabric.

     Pin the hem in place, matching the seam lines so...MORE that it does not twist as you sew it in place.

    Continue to 5 of 5 below.
  • 05 of 05

    Sew the New Hem

    Sewing the Hem in Jeans
    Sewing the Hem in Jeans. Debbie Colgrove, Licensed to About.com

    Your goal in sewing the new hem is to replicate the manufactured hem as closely as possible. Using the thread that was used by the manufacturer will help you replicate the original hem. Investing in the denim thread that matched your task is well worth the investment.

    To sew the hem in place, use a seam guide to sew as close to the upper folded edge as possible. Using needle position and a presser foot seam guide together, while not watching the sewing machine needle as you sew, allows you to sew...MORE a straight line of stitching close to that edge.  You want the stitching as close to the edge as possible to prevent the hem from turning up on it's own as it would if the stitching is not close to the folded edge.

    Trim the threads and press the hem again. Your jeans are now ready to wear and launder, hopefully for many years.