How to Manage a Failed Window Seal

House windows

 

Joe_Potato / Getty Images

Older homes may have windows with single-pane glass, but increasingly modern windows sold for new construction or replacement feature some form of sealed glazing. Known as IGUs (insulated glass units), these insulated windows stand at the cornerstone of homes' energy management system. Over time, the seals on these insulated windows may fail, which compromises the insulating ability, reduces the clarity of the window, and allows more sound to pass into the house.

Construction of Sealed IGU Windows

Sealed windows are constructed with two or three layers of glass assembled to form an IGU (insulated glass unit). Older-style, single-pane windows are not sealed, though sometimes storm windows attached to the home's exterior gives the impression of double-glazing.

The multiple panes of glass are separated by a spacer material and sealed together at the edges. The space between glass panes is sometimes a partial air vacuum, but more often it is filled with some form of inert gas, such as argon or krypton.

In addition, the glass panes may be coated with a heat-reflective low-E material. This combined technology slows energy transfer so that the IGU windows (with seals intact) keep homes warmer in the winter and cooler in the summer. While nothing in a wall system can be as energy-efficient as a fully insulated wall (with studs and typically fiberglass, foam, or rockwool insulation), a quality insulated two- or three-pane sealed window is a close contender.

How Window Seals Fail

Even in the best of circumstances, the seals on insulated windows are not perfect. Over time, the inert gas inside the units can leak out and moisture from outside air can seep into the space between panes.

One major glass manufacturer Vitro, Architectural Glass (formerly PPG), outlines how window seals can fail:

The partial pressure differentials between the air outside and the gas inside cause both argon and krypton to naturally escape an IGU. Even when an IGU is perfectly constructed, the gas will escape at a rate of about one percent per year, and that rate is much faster when the IGU is poorly made.


Usually, IGU windows experience seal failure gradually in the years following installation in a home. But IGUs are even known to have seal failure even when new.

Transportation over high altitudes such as mountain passes, for example, may cause seal failure due to changes in atmospheric pressure. To avoid this, some manufacturers maintain regional factories so that windows are installed in conditions that are close to those under which they were manufactured.

Checking For Failed Window Seals

Knowing if your windows have seals that have failed is not always easy. Some people believe that you can detect seal failure simply by touching the glass to feel for temperature differences. While this may give you a general idea of the state of your windows, it's not the sole determining factor. Additionally, there is no tester available on the consumer market that will tell you, conclusively, if your seals have failed; it's more a matter of deduction.

Clean the Glass

Since detecting seal failure is a visual process, you need to provide yourself with a blank slate. Thoroughly clean both the inside and the outside of the window, so you are certain that you are not looking at external moisture and grime.

Glass Distortion

When the inert gas begins to leak out of the IGU, the panes sometimes begin to bend and collapse slightly in the center, and this can cause the glass to look distorted, or sometimes even break.

By standing at a distance outside and looking at the reflection, you can see if the glass is more distorted than those of windows not affected. Such distortion likely indicates that seal failure has occurred.

Sporadic Condensation

Fogging, hazing, or moisture between the two panes of glass usually means that the window seal has failed. While a window can certainly fail and not have any moisture between the two panes, it is more common to see moisture between the two panes. This fogginess or hazing may come and go, depending on weather conditions. It is most likely to occur when indoor and outdoor temperatures are very different and may vanish as temperatures change or humidity levels change.

Managing Failed Window Seals

File a Warranty Claim

Windows are one purchase where saving the warranty information is very important. Manufacturer warranties can range from 5 years to 15 years or more.

Most window manufacturers warranty their insulated windows against failure in a pro-rated manner so that consumers are reimbursed on a sliding scale depending on the age of the windows. A window that demonstrates seal failure immediately after installation will likely be reimbursed at the full purchase cost, while one near the end of its warranty period will pay less. Manufacturer warranties rarely, though, cover the cost of labor. The labor costs for replacement are usually borne by the homeowner.

Remember that a lifetime warranty does not mean the window is guaranteed for your lifetime or the lifetime of your home. Such warranties cover the expected lifetime of the window itself as defined by the manufacturer.

Make sure to carefully read warranty conditions when you are buying new or replacement windows, and keep all warranty literature.

Living With Fogged Windows

Another option for managing windows with failed seals is to live with the situation. If you live in a moderate climate, your need for sealed IGUs will be less important than if you live in a place of brutal, extreme temperatures.

Weigh the cost of new windows with the increased energy cost, and it may be less expensive to keep the window, failed seal and all. If the window is located in a key area of your home where you spend a lot of time, then you may want to replace the window, after all.

Another compromise is to wait on replacing the fogged window until it's time to replace a few other windows.

Have the Window Defogged

Another option is to call a defogging company. After drilling a tiny hole in the glass, the company expels the condensation and then installs a valve and seal.

Window defogging is not an inexpensive alternative and results are varied. The process does not generally replace the inert gas inside the IGU, so it does not fully restore the insulating value of the window. It can, however, remove the fogginess and condensation that spoils the look of the window—at least for a time.

Replace the IGU Only

Whether as part of a warranty claim or purchased on your own, the failed IGU unit within the frame can be replaced. Some companies specialize in custom-manufacturing IGU units to specific measurements, though you will need to hire someone to install the IGU once you take delivery. Some companies specialize in the whole process—measuring, manufacturing and installing—but the cost for this is nearly as high as for having the entire framed window replaced.

Replace the Entire Window

Depending on the age of the window, replacing the entire window (frame and all) may be the best option. Sometimes this will be the approach taken if the windows are still under warranty and were installed by the manufacturer's installation team. This is one instance when labor costs may be covered. More often, this means you'll be hiring a replacement window firm to install new windows.

Replacing the entire window is the best option when the window is old and the frames and operating hardware may be wearing out anyway. Full replacement can also allow you to take advantage of new technology and energy-saving innovations that might be available. If several windows are demonstrating failed seals, it may be time for a whole-house window replacement project.