I-cord Bind Off

I-cord knitting
Lilyana Vinogradova / Getty Images
  • 01 of 04

    Cast on Stitches

    Casting on stitches.
    Cast on stitches for I-cord bind off. (c) Sarah E. White, licensed to About.com, Inc.

    While a simple bind off stitch is simple it doesn't always produce the cleanest or neatest of edges. If you're looking to add some flair or just want a neater finishing touch to your project the I-cord bind off is perfect. It creates a tube similar to an I-cord which is where the name comes from. 

    To begin your I-cord bind off, knit your piece as described in the pattern. The bind off can be worked on either the front or back side, but I show it on the front for ease of illustration.

    Before...MORE beginning the bind off, cast on three more stitches at the beginning of the row, with all the stitches on the left-hand needle. And easy way to do this is with the cable cast on.

    You can cast on more than three stitches if you like to make a wider cord, or fewer to make a narrower cord it all depends on the look you're going for.

    Continue to 2 of 4 below.
  • 02 of 04

    Beginning the Bind Off

    Decreasing for bind off.
    Decreasing to begin the bind off. (c) Sarah E. White, licensed to About.com, Inc.

    Now that your cast on stitches are in place, knit the first two stitches and do a slip, slip, knit.

    This means you will have decreased one stitch and you'll have three stitches on your right hand needle.

    If you cast on a different number of stitches, knit all but one of the stitches you cast on before performing the decrease.

    Continue to 3 of 4 below.
  • 03 of 04

    Continuing the Bind Off

    Stitches slipped back on left needle.
    The stitches are slipped back on the left needle. (c) Sarah E. White, licensed to About.com, Inc.

    In order to continue working the I-cord bind off (also known as applied ​I-cord) you have to slip the stitches you just worked back from the right hand needle to the left hand needle.

    These stitches should be slipped as if to purl. To continue, perform the knit 2, slip, slip, knit again.

    Continue to 4 of 4 below.
  • 04 of 04

    Finishing the Bind Off

    Finished I-cord bind off.
    Finished I-cord bind off. (c) Sarah E. White, licensed to About.com, Inc.

    Continue to repeat the previous step until you are down to as many stitches as you cast on at the beginning of the bind off (in the case of this example, that's 3).

    Slip the stitches back to the left hand needle one more time and knit them all together. Break your yarn and pull it through the remaining loop.

    If you have an even number of stitches left you can also graft the tube closed, which will allow it to keep a slightly more rounded shape on the end.

    This method of binding off is very time...MORE (and yarn) consuming, but it also makes a great finishing touch for a pocket, collar, button band or anywhere else you like.

    I-cord Bind Off Tips

    This bind off can get pretty tight, causing the work to pucker. If you're having trouble, use a needle a size or two larger than the one you worked your project with in your right hand to keep the stitches loose. You should also try to leave yourself some extra room when you're knitting.

    Remember, however, that you are knitting an I-cord, so the first stitch of each row needs to be pulled tightly enough to keep the tube closed on the back side.