Make a Simple Braided Arabian Halter Custom Fitted to Your Model Horse

  • 01 of 07

    Make a Braided Arabian Halter for a Breyer or Other Model Horse

    Arabian Style halter made for a Breyer Model Horse
    Make this simple braided Arabian-style halter for Breyer horses. Photo Copyright 2011 Jeanne Grunert

    You can make a simple braided halter with tassel for a Traditional scale Breyer horse out of a few odds and ends you have around the house. This is a good beginner's project or children's project. You can make a play halter in an afternoon. If you don't know how to make a braid, you can still make the halter, leaving the threads unbraided and simply tying them off. You can also easily scale this up for a large Marx brand model horse or down for other Breyer horses, such as the...MORE Classic Arabian family or the Paddock Pals and Stablemate Arabians.

    Continue to 2 of 7 below.
  • 02 of 07

    Materials Needed to Make an Arabian Halter for Breyer Horse Models

    Materials for a braided Arabian style halter for a Breyer model horse
    Gather the materials you'll need to make this simple Arabian style halter for a Breyer horse. Photo copyright 2011 Jeanne Grunert

    Gather your materials together before you start making this Arabian style play halter to fit a Breyer or other model horse. You may already have a skein of embroidery thread around the house. Use a color that looks nice with your horse model. A bright blue would look nice against a gray or white horse, while green might look good with a palomino or chestnut Arabian. Black and bay horses look beautiful with gold, silver or another bright color.

    To Make the Arabian Halter You Will Need:

    • A Breyer or...MORE other model horse. A vintage mahogany bay Breyer Proud Arabian Mare was used for the project photos here.
    • One skein of embroidery floss
    • Piece of cardboard and a large straight pin with a glass ball head to hold your threads while braiding them
    • Sharp scissors
    • One or two pencils


    Continue to 3 of 7 below.
  • 03 of 07

    Braid the Thread to Form Side Pieces for a Simple Arabian Model Horse Halter

    Braiding embroidery thread to make an Arabian model horse halter.
    Make a braid for the halter from embroidery thread. Copyright 2011 by Jeanne Grunert. Used with permission.

    The first step in making your simple Arabian style model horse halter is to make a long rope-like braid out of the thread. This is what you will knot together to make your halter. Cut three lengths of embroidery thread about 12 inches long, keeping the strand six-ply. Typical embroidery thread is 6-ply, meaning it can be separated into six strands, but keep the strands together for each of the three lengths you need to braid together.

    Tie the three threads together, then insert the stick pin...MORE through the threads into the cardboard close to the knot at the top of the thread. Begin braiding. Braid it very tightly until you get to the end. If the braid gets lumpy, flatten it out or unwind it and start again. Keep the braid tight and flat! Make a knot at the end to tie it off.

    Continue to 4 of 7 below.
  • 04 of 07

    Measure, Cut and Tie the Headstall of the Breyer Arabian Model Horse Halter

    Measuring an Arabian model horse headstall from braided thread.
    Use braided embroidery thread for the headstall of a simple Arabian style model horse halter. Copyright 2011 by Jeanne Grunert. Used with permission.

    Take your Breyer or other horse model and the length of braided thread and hold the thread against the horse's nose, near the left nostril and on the side of the face. Bring the thread back gently up the side of the horse's head, behind the ears, and back around to the right nostril. Add at least a few centimeters of length to that, then make a knot in the thread. Clip the braid, holding the end together carefully. Knot the long piece so it stays braided. This short piece you just made...MORE will form the headstall of your Breyer horse halter.

    Continue to 5 of 7 below.
  • 05 of 07

    Make the Noseband for an Arabian Style Model Horse Halter

    Making the noseband for an Arabian model horse halter.
    Make the noseband out of a circle of braided thread. Copyright 2011 by Jeanne Grunert. Used with permission.

    The noseband is the part of a horse's halter that fits over the nose. On this toy or play halter, you will tie it to the side pieces or headstall. Take your remaining piece of long braid and gently wrap it around the horse's nose, forming a loose circle. Tie the circle. Hold the end of the remaining braid tightly. Clip it off the circle. Tie the end again. Now tie the headstall piece on either side to the circle. Clip off any remaining thread.

    Continue to 6 of 7 below.
  • 06 of 07

    Make the Tassel for the Arabian Style Model Horse Halter

    Tying a tassel for a halter for an Arabian model horse.
    Wrap the thread around one or two pencils to make a tassel. Copyright 2011 by Jeanne Grunert. Used with permission.

    Now you will add a big tassel to the Arabian model horse halter. Take a length of embroidery thread from the skein and wrap it around the pencil. You may need to use two pencils to get it the size that you want it. Don't wrap it too tightly. When you've wrapped it several times around the pencil, over and on top of itself, clip the thread. Take a length of thread about four inches long and run it under the top of the bundle of thread on the pencil. Tie it as tightly as you can. Slip the...MORE scissors under the bottom of the thread bundle and snip it across. Use an extra piece of thread and tie it around the top of the tassel to finish it off. Now tie it to the noseband. You may want to use nail scissors or embroidery scissors to neaten the end of the tassel.

    Continue to 7 of 7 below.
  • 07 of 07

    Make the Braided Lead Rope to Match Your Arabian Style Model Horse Halter

    Adding a braided lead rope to an Arabian model horse halter.
    The finished Arabian style halter is great for Breyer horses. Copyright 2011 by Jeanne Grunert. Used with permission.

    Now you will use the rest of the braid that you made to make the lead rope to match your Arabian style model horse halter. Tie the lead rope under the chin to the noseband, near the tassel. In the photo of the bay Breyer Proud Arabian mare, the lead rope is stretched off camera and placed over the edge of the chair, but you can also stretch it off camera and wedge it under a few books to keep it the right height if you do not have a doll handler. To take your halter off, gently slip it over the...MORE model's ears.

    Now that you know how to make a simple play halter for a Breyer Arabian horse model, experiment with different materials. As you practice with a yard or thread halter, you're developing basic skills for stepping up to make a leather halter.