Make Pickles and Cucumbers from Polymer Clay

  • 01 of 10

    Tiny Pickles and Cucumbers From Polymer Clay Canes

    Miniature pickles made from polymer clay canes for dollhouse scale food scenes .
    Lengthwise and crosswise pickle slices and whole pickles made from polymer clay for dollhouse scale scenes. Photo © 2014 Lesley Shepherd

    These dollhouse scale dill pickles are made from a polymer clay cane that can be adapted to make cucumbers or a range of sweet pickles in miniature scales. The cane is a fairly simple project to master, and the slices are realistically translucent when held up to the light if they are set into a jar. Here I've shown how the pickles can be used with a grilled hamburger patty.  They can also be cut into tiny chunks, cured, then combined with acrylic glaze or tar gel medium to make relish for...MORE tiny hot dogs.

    If you are new to working with polymer clay, read the basics of polymer clay before you begin. Do not use food utensils to work with polymer clay. Keep it safely out of reach of children.

    Most of the work is in producing colors to match real pickles (or cucumbers). This gives beginners some good practice in custom blending polymer clay as well as simple caning techniques. For the best results, use the firmest polymer clay you feel comfortable working. Soft polymer clays tend to blend instead of keeping crisp separations as you cane them. Mine were a mix of soft and firm clays, and were too soft to get the level of definition I would have liked! The center seed layers should have been much more defined.

    To make miniature dill pickles, cucumber pickles or cucumbers you will need:

    • Basic colors of polymer clay in translucent (porcelain), white, brown, green and yellow.  See the information on blending  dark green and  dark brown polymer clay from primary colors.
    • Sharp Clay Blade or Tissue Blade
    • Flat rolling surface
    • Acrylic clay roller or rolling pin or bottle
    • Baking Tray or Baking Surface
    • Baking Soda (to prevent clay from glazing in contact with a smooth surface)
    • Acrylic Varnish or Gloss / Semi Gloss Coating.
    Continue to 2 of 10 below.
  • 02 of 10

    Making the Base Color for Polymer Clay Pickle Skins

    Combining polymer clay colors to make a dark olive for the skin of dollhouse scale pickles.
    Green, brown and yellow clays combined to make a deep olive green as the basis for the skin of miniature pickle canes from polymer clay. Photo © 2014 Lesley Shepherd

    The first step in making polymer clay pickles or cucumbers, is to make the skin color which is the darkest color you will need.  I combined equal amounts of dark green, dark brown, and zinc yellow to make a dark olive color as the base for miniature dill pickles.

    For regular cucumbers you may only need the dark green. I used small amounts (around 1/4 inch square) of the base colors in order to make dollhouse scale canes. As you will be adding translucent clay for the centers, you don't need...MORE to make a lot of the olive green base.

    Continue to 3 of 10 below.
  • 03 of 10

    Making Translucent Clay for the Dill Pickle Centers

    Making various depths of translucent olive clay for miniature polymer clay pickles.
    The basic olive green polymer clay is blended with one part of translucent clay, then blended again with an equal part of translucent clay to make various depths of olive green for the centers of the miniature pickles. Photo © 2014 Lesley Shepherd

    You can make a range of lighter olive clays to mimic the semi translucent shades of dill or sweet pickle centers.   The photo on this page shows the basic dark olive green clay, which mixed one for one with translucent makes the lighter olive clay in the center. The olive clay I used for the centers of my dill pickles was mixed from the middle olive clay combined with an equal amount of translucent again to make the lighter clay on the bottom.

    Continue to 4 of 10 below.
  • 04 of 10

    Adjusting the Basic Colors To Make Your Favorite Pickles

    Adjusting translucent polyclay colors for miniature pickle canes.
    Basic blends of olive green translucent polymer clay are adjusted with brown, white or yellow to make the correct shade for miniature pickles. Photo © 2014 Lesley Shepherd

    To mimic a particular type of pickle (or cucumbers), you will need to adjust the basic colors of your translucent center clay.  The small amounts of brown, yellow and white shown in the photo on this page were added to the basic light olive green to further adjust the color to match real pickles.  As some clays darken when cured (baked) you may need to test a bit of your final blend to make sure it is the color you want, before you proceed to make your pickle / cucumber cane.

    To make custom...MORE blends add small amounts at first to see how your clay color develops. 

    Continue to 5 of 10 below.
  • 05 of 10

    Making a "Seed" Cane for the Center of Polymer Clay Pickles

    Making a simple seed cane for the centers of polymer clay cucumbers and pickles.
    The seed cane for the miniature pickles or cucumbers is made by wrapping a thin layer of white clay around a pale green translucent clay. Photo © 2014 Lesley Shepherd

    The first step in making the polymer clay centers of canes for cucumbers or cucumber based pickles,  is to make the 'seed' cane.  To do this, mix a small amount of very light olive green (mainly translucent) clay. 

    Roll out a thin sheet of white clay, and wrap it around the roll of green as shown in the photo. Trim the clay edges where they touch once they are wrapped entirely around the roll.

    If you are making cucumbers instead of pickles, you may want to make the seed cane from pure...MORE translucent clay instead of wrapped with white, the white edge of the seeds might blend too much into the white center of the cucumber. For the pickles you need to have some type of contrast between the outline edge of the seed cane (here white) and the main body of the pickle or cucumber cane.   See photos of pickles or cucumbers to see how the seeds look when the cucumber / pickle is sliced.

    Gently press the roll to join the white to the faint green clay, and begin to roll the clay into very thin rolls. You will need around 15 short thin (1 inch or 2.5 cm) rolls for a basic pickle or cucumber cane .

    Continue to 6 of 10 below.
  • 06 of 10

    Assembling The Central Core of a Pickle or Cucumber Cane

    Assembling the central seed core of a polymer clay cane for pickles or cucumbers.
    Very fine strands of 'seed' cane alternated with strands of green make three seed sections for the 3 lobed center of a polymer clay cane for cucumbers or pickles. Photo © 2014 Lesley Shepherd

     Most (but not all)  cucumbers and pickles have 3 distinct 'lobes' of seeds running through the center.  To replicate that in miniature using polymer clay, I first lay out alternating strips of three to five fine rolls of 'seed' cane, with similar sized rolls of the clay I will use for the central core of my pickle or cucumber.  These strips are then gathered into a loose roll. On this page the color is for a dill pickle as that makes it easier to see the process. The top of the...MORE photo shows a seed can (and a cross section of that cane before it is rolled thin, showing the pale translucent green center surrounded by white.

    The first section below the single fine roll is the grouping of alternating strips, and the other two groupings below are the alternating strip groups gathered into rolls, and separated with equal sized strips of the green pickle center color.  You will need three rolls composed of alternating strips, separated by three similar sized rolls of green to hold the seeds into rough lobes in the center of the cane.

    Continue to 7 of 10 below.
  • 07 of 10

    Finishing the Center of the Pickle or Cucumber Cane

    Assembling the center core of a cane to make miniature cucumbers or pickles from polymer clay.
    The centre strands for the polymer clay seed canes are set into a roll and wrapped with a layer of translucent olive clay which makes the main body of the canes for miniature pickles and pickle slices. Photo © 2014 Lesley Shepherd

    To finish the center of the polymer clay cane for cucumbers or pickles, the three groups for the 'seeds of the pickles, separated by the three rolls of translucent green clay, are rolled loosely into a cane. (see photo).

     More of the translucent olive green clay (for dill pickles, for bread and butter pickles or cucumbers you might use off-white or white) is rolled out into a thin sheet which will be used to cover the seedy center of the pickle / cucumber cane center.  This cane is assembled...MORE the same way the seed cane was assembled, by rolling the olive coating over the central core, trimming away the excess, and pressing down gently on the roll to set the cane.

    Do not thin this roll out, leave it as thick as possible for now. Set it aside to firm up while you prepare the pickle / cucumber skin.

    Continue to 8 of 10 below.
  • 08 of 10

    Blending Stripes on the Outer Pickle Skin for a Polymer Clay Cane

    Blending a background of mixed colors for the skin of polymer clay pickles in miniature scales.
    Smalls strips of lighter colors are added to the dark base of polymer clay to make the 'skin' for miniature pickles and cucumbers from polymer clay. Photo © 2014 Lesley Shepherd

    To make the outer skin for pickles, you will get the best effect if you add small thin stripes of clay to the background color you need for your cucumber or pickle cane.  I used bits of yellow light green and olive green and laid them at random over a thin layer of the dark green I produced in step two.  You want the stripes to run the length of the cane, rather than around it in rings.

    When you have added bits of color to your main layer, take a polymer clay roller and roll out the skin layer as...MORE thin as possible, gently blending in the strips of color you have just added so they are set level with the main green color.

    Continue to 9 of 10 below.
  • 09 of 10

    Finish the Polymer Clay Cane for Miniature Pickles or Cucumbers

    Blended olive polymer clay wrapped around a center cane for miniature cucumbers and pickles.
    The central translucent and seed layer for miniature polymer clay pickles is wrapped with the blended pickle skin layer. Photo © 2014 Lesley Shepherd

    To finish the polymer clay cane for pickles or cucumbers wrap your dark green or blended 'skin' around your central core cane as shown. The cane cross section in the center of this photo shows a skin layer which should be thinner in comparison to the thickness of the core cane. You want the pickle (or cucumber) skin to be very thin, just wide enough to notice the color. In my pickles the skin was too thick to roll out enough on the cane for a realistic effect. I should have made my core...MORE cane thicker to start with, or made my skin layer much thinner than you see in this photo.

    Continue to 10 of 10 below.
  • 10 of 10

    Add Detailing to Miniature Polymer Clay Pickles / Cucumbers

    Shaping and texturing polymer clay into miniature dill pickles.
    Sections of the pickle cane are cut, the ends are gently rounded, and then lines of small dots are made along the surface to turn the clay cane into miniature dill pickles. Photo © 2014 Lesley Shepherd

    To make your polymer clay cane into pickles or cucumbers, roll the cane out on a flat surface to an even roll the thickness you want for your cucumber or pickle. I am making dill pickles with the canes in this tutorial, and want them to be roughly 1 inch in diameter in 1:12 scale, so roughly 1:12 inch (2mm) in diameter.

    Set the rolled canes aside to firm up in a cool area (fridge or freezer) before you attempt to slice them.

    For Full Dill Pickles

    Slice sections of the cane to the length you want...MORE for your pickles. gently roll the ends to round the 'skin' over the cut end of the cane.  Bend the 'pickles' slightly and use a pointed modeling tool or pin to make lines of small indentations across the length of the pickle.  Gently roll the pickle to blur the lines slightly.

    For Cross Cut Pickle Slices

    Sweet and dill pickles are often cut in cross section. Use a sharp clay blade to slice thin sections off a cold (and firm) clay cane. Draw the blade across the cane, rolling the cane as you cut slices so that the slices are not flattened on the bottom side. 

    For Lengthwise Dill Pickle Slices

    Form a pickle as for full dill pickles. Use a sharp clay blade to cut the pickle lengthwise to make long dill pickle slices.

    Crinkle Cut Pickles

    If you wish you can use the side of a fine pin to make gentle indentations across the surface of cross cut slices to emulate 'crinkle cut' pickles.

    Place your pickles or pickle sections on a thin layer of baking soda set onto a baking surface or baking tray. Bake according to your clay's directions.  When your clay has baked, allow it to cool. Remove the pickles (or cucumbers) from your tray and carefully wash off the baking soda.

    Allow the pickles to dry, then glaze with a thin gloss coating of acrylic varnish, floor polish, or gloss coating. Drips of coating can be colored slightly to look like pickling vinegar if you wish.

    Cucumbers can be polished gently on the outside with a bit of furniture wax or clear shoe wax, they do not need a gloss coating.  Allow to dry.

    Vary the coloring of your pickles and add them to jars, food trays or make chopped relishes for your miniature displays.

    Have fun!