How to Make Quilt Borders with Corner Squares

  • 01 of 02

    How to Measure and Sew Quilt Borders with Corner Squares

    How to Make Quilt Borders with Corner Squares
    Make Quilt Borders with Corner Squares. Janet Wickell

    Learn how to make quilt borders with corner squares, a fast and easy way to add a little extra interest to your quilt. The corners can be cut quickly from plain squares of fabric, or can be made from patchwork or applique quilt blocks.

    The quilt block used in the example quilt is a small version of the Arrow Crown design.

    You can create borders from either crosswise or lengthwise cuts of fabric.

    Determine the Size of Corner Squares

    • For pieced quilt blocks at corners, the unfinished width of borders should match the unfinished dimensions of the corner blocks. For instance, if border strips are 4-1/2" wide before sewing them to the quilt, the squares or blocks should measure 4-1/2" x 4-1/2".
    • For corner squares that butt against multiple borders, cut squares or make blocks that match the total border width.

    Determine Borders Lengths and Add Corner Squares

    1. Measure the quilt through its vertical midpoint using the same technique required to add butted borders to a quilt. Cut or construct two borders that length to use on the quilt's right and left sides. Set aside.
    2. Use the same technique to measure the quilt through its horizontal midpoint and cut or construct two borders that length to use along the top and bottom edges of the quilt.
    3. Sew the side borders to the quilt using the instructions for butted borders.
    4. Sew corner pieces to each end of the top and bottom borders. Press seams towards the borders.
    5. Sew borders to the quilt, matching seams where side borders and corners meet and then matching along the entire edge.

     

    Continue to 2 of 2 below.
  • 02 of 02

    Determine Borders Lengths and Add Corner Squares

    Sew Quilt Borders with Cornerstones
    Quilt Borders with Cornerstones. Janet Wickell

     Measure Carefully When You Sew Borders to a Quilt

    1. Measure the quilt through its vertical midpoint using the same technique required to add butted borders to a quilt. Never measure for borders along the outer edges of a quilt because those edges are nearly always off just a bit.
    2. Cut single panels or sew together strips to create two borders that length to use on the quilt's right and left sides.
    3. Sew the side borders to the quilt using the instructions for butted borders, matching endpoints...MORE and midpoints first and easing in any differences. Use straight pins to secure fabrics.
    4. Press seam allowances towards the borders.
    5. Measure the quilt through its horizontal midpoint and cut or construct two borders that length to use along the top and bottom edges of the quilt.
    6. Sew a corner square or quilt block to each end of the top and bottom borders. Press seams towards the borders.
    7. Sew borders to the quilt, matching seams where side borders and corners meet and then matching midpoints and along the entire edge.

    Avoid Piecing the Long Borders

    • If you can cut an entire border length from yardage for the shortest sides of a quilt, reverse the directions above, sewing the short borders to the quilt first.