01 of 02
Determining Dimensions for a Cubic Foot of Concrete
At some time you are going to have to figure out how much concrete you need for a repair or a major project, maybe for foundations in a wood deck project. Same thing for buying sand which usually serves as the base for a concrete project.
Few things are as frustrating as having way too much sand delivered or running out of concrete for a project because you mismeasured. A cubic foot can come in many shapes as we'll see. In this tutorial, I'll explain how you can easily figure out the cubic feet or cubic yards needed for a project.Continue to 2 of 2 below.
02 of 02
Measuring a Cubic Foot
The surface area of a concrete slab or sand base is directly affected by its thickness. In the photo, you see two examples of a measured cubic foot. Since a cubic foot is measured by Length x Width x Thickness, a cube 1-foot long x 1-foot wide x 1 foot thick is therefore 1 cubic foot.
As you reduce the thickness, you increase the surface area (LxW) coverage, like cake batter.
To determine how many cubic feet you need for a hole, measure the length, width, and thickness together, all measured in feet. So a 4" thickness is 4"/12" or 0.333 feet. The result of this Length x Width x Thickness multiplication is cubic feet.
Likewise, a cubic yard (yard = 3 feet) is a cube 3 feet by 3 feet by 3 feet or 27 cubic feet.
Here's a helpful table that shows how surface area changes as thickness varies for one cubic yard (27 cubic feet) of material:
- 3" Thickness Provides nominal 100 Square Feet of Surface Area
- 4" Thickness Provides nominal 81 Square Feet of Surface Area
- 5" Thickness Provides nominal 65 Square Feet of Surface Area
- 6" Thickness Provides nominal 55 Square Feet of Surface Area
- 8" Thickness Provides nominal 40 Square Feet of Surface Area