No Mint Mark on Lincoln Pennies

Why Doesn't my Lincoln Penny Have a Mint Mark?

Lincoln Cent With and Without Mint Mark
Lincoln Cent With and Without Mint Mark. Image Copyright: © 2014 James Bucki

Mint Marks on Coins

Mint marks are used on coins to indicate the physical location of the United States Mint facility that produced the coin. Some countries use multiple letters or symbols to indicate the production facility. On United States coins, the U.S. Mint has used none, one, or two letters to indicate the mint facility that produced the coin.

The location of the mint mark will vary depending upon the type of coin.

It has been a tradition in the United States that coins minted at the Philadelphia, Pennsylvania facility do not carry a mint mark since this is the main production facility for the mint. However, there are some exceptions and changes to tradition where the Philadelphia mint facility began using a "P" is a mint mark on coins.

Why Does the Mint Use Mint Marks?

When the United States Congress first authorized the production of coins in 1792, there was only one facility that produced coins located in Philadelphia, Pennsylvania. The law also dictated that once a year a panel of inspectors (The Assay Committee) would inspect a sampling of coins from each mint facility. They would check to make sure the coins were composed of the proper ratio of metals, the weight was within acceptable tolerances, and the diameter and thickness of the coin were correct.

Beginning in 1838, the United States Mint began opening branch facilities to help produce coins for a growing nation.

If the assay committee detected a problem with one of the coins, it would be necessary to know which mint facility produced the coin. The essay committee would then launch an investigation to investigate out why the coins produced at that facility were not of the proper metallic content or weight.

The Philadelphia Mint Begins Using a "P" Mint Mark

In 1943 a large "P" was added to the reverse of the Jefferson nickel to indicate that the metal composition of this coin was different (35% silver, 56% copper and 9% magnesium) than previously minted nickels (25% nickel and 75% copper).

This change in metallic content continued on Jefferson nickels through 1945. 

In 1979 the U.S. Mint broke tradition by placing a small "P" on the obverse of the Susan B. Anthony dollars minted in Philadelphia. In 1980 a "P" was added to all remaining United States coins minted in Philadelphia except for the Lincoln cent. This tradition of not placing a mint mark on Lincoln cents continued through 2016.

The mint added a mint mark ("P") to the 2017 Lincoln cents manufactured in Philadelphia to celebrate the 225th anniversary of the founding of the United States Mint. The tradition of not having a mint mark on Lincoln cents made and Philadelphia will resume with the production of 2018 dated Lincoln cents.

Mint Marks Used on United States Coins

The following table illustrates the mint marks used by the various mint locations in the United States:

 
NameMint MarkCity, StateDates of OperationNotes
PhiladelphiaNone or PPhiladelphia, Pennsylvania1793 - Present 
DenverDDenver, Colorado1906 - Present 
San FranciscoSSan Francisco, California1854 - Present 
West PointWWest Point, New York1984 - Present 
CharlotteCCharlotte, North Carolina1838 - 1861Gold coins only
Carson CityCCCarson City, Nevada1870 - 1893 
DahlonegaDDahlonega, Georgia1838 - 1861Gold coins only
New OrleansONew Orleans, Louisiana1838 - 1909