Origami business card holders are a great choice for anyone interested in practical origami projects. Although a business card holder made from origami paper won't be as sturdy as a purchased business card case, it's very easy to simply whip up a new one whenever it needs to be replaced.
Use paper that is between 8 1/4" x 8 1/4" and 8 1/2" x 8 1/2" square to make your origami business card holder. If you don't have purchased origami paper, check out the About Origami... Free Printable Origami Paper slideshow for a selection of letter sized paper that can be cut to fit this project. Alternatively, you could fold the case from a cut sheet of patterned wrapping paper.
01 of 08
Complete Your Origami Business Card Case
If you use a 9" x 9" square sheet of paper, you could use business card holder to present a gift card if you don't have time to fold an origami gift card envelope. Tie a ribbon around the finished case for a pretty decorative touch.
If you make the business card holder using 12" x 12" square scrapbook paper, you can use it to carry coupons or store rewards cards on a shopping trip.
02 of 08
Fold into Fourths
To begin making your origami business card holder, start with the patterned side of your paper face down and the white or colored side face up. Fold the paper in half. Crease well, then unfold. Fold the left and right corners in to meet the center crease. Crease well, then unfold. When you're finished with this step, your project should look like the paper in the photo to the left.
03 of 08
Make Small Triangles
Fold all of the corners down to make small triangles as indicated in the photo to the left. The edges of the triangles should touch the outer creases you made in Step 1.
04 of 08
Fold the Sides In
Fold the left and right sides in to meet the center crease as indicated in the photo to the left.Continue to 5 of 8 below.
05 of 08
Flip the paper over. Fold the bottom up as shown in the photo to the left.
06 of 08
Fold the Second Flap
Fold the top down so that it slightly overlaps the section you just folded. Tuck the bottom edge into the diagonal flaps. This will keep the origami business card holder closed without needing any tape or glue.
07 of 08
Project Variation #1
If you'd rather display business cards in an upright holder, simply fold the flap from Step 5 in the opposite direction and make a second crease where the top horizontal edge of the flap from Step 4 meets the paper. The holder will stand upright once the first few business cards are added.
08 of 08
Project Variation #2
If you don't have any business cards to display, you can tuck a wallet sized photo into the flaps and push them together tightly to make this project into a simple origami picture frame. Pinch the back layer into a triangle shape so the frame will stand on its own.
For more origami frame project tutorials, check out the Origami Picture Frame Ideas sideshow.