# Origami Paper Storage Pocket Tutorial

• 01 of 06

### Origami Paper Storage Pocket Tutorial

Learn how to fold a cool origami pocket to store all of your origami paper, this is especially useful if you bought some origami paper and it is still in a flimsy plastic packet, these often break, so to keep your paper straight and crease free it's important to store it properly.

This is a very easy origami envelope to make, you will only need rectangular paper.

You will need to find some larger paper and something to measure and cut it to size.

You can use wrapping paper, butchers paper,... brown postal paper, pretty wash paper available in rolls from craft shops and also you can find A2 and A3 paper individually or in pads at most art and craft shops, as well as big chain stores like K-mart and Target.

### You Will Need

· 1 sheet of rectangular paper such as A4 or letter paper

For example, 21 x 29.7 (A4)

It will fit small paper that is about 8 – 10 cm.

If you want to fit in some paper that is 15 x 15cm, start with paper that is 47.6 x 34 cm

The way to work out how big your paper needs to be – take the width of your paper (that will go in the pocket) let say 20 cm.

Add 1 – 2 cm (depending on how many sheets there will be)
Now do this sum using your number. (22)
22 x 2.8 = 61.6
22 x 2 = 44

So you would need a paper that is 61.6 x 44 cm.

Continue to 2 of 6 below.
• 02 of 06

### Origami Paper Storage Pocket Tutorial - Step 1

You can watch a quick video tutorial of this model here.

2. Fold the top right corner down diagonally and align with the bottom edge.

3. Unfold.

4. Fold the top left corner down diagonally and align with the bottom edge.

Continue to 3 of 6 below.
• 03 of 06

### Origami Paper Storage Pocket Tutorial - Step 2

5. Unfold.

6. Grap both sides and pull them into the center.

7. Press them into the middle and align them.

8. Straighten out the folds.

Continue to 4 of 6 below.
• 04 of 06

### Origami Paper Storage Pocket Tutorial - Step 3

9. Fold the right flap of the front layer diagonally left to align with the middle.

10. Do the same with the left flap.

11. Fold the right flap behind.

12. Fold the left flap behind.

You can skip 11 & 12 for a more secure pocket.

Continue to 5 of 6 below.
• 05 of 06

### Origami Paper Storage Pocket Tutorial - Step 4

13. This is what you should have.

14. Fold the bottom right corner up to the top center point.

15 & 16. Fold the left corner up as well.

If you have used thicker paper, in order to make your flaps meet at the center, you might need to cut off the flaps you folded under in the previous step (11 & 12).

Continue to 6 of 6 below.
• 06 of 06

### Origami Paper Storage Pocket Tutorial - Step 5

You can now fold your flaps into the top of the pocket.

For more tutorials and also video tutorials, check out: