How to Paint Bathroom Cabinets

Painting Kitchen and Bathroom Cabinets

Johner Images / Getty Images

  • Working Time: 4 hrs
  • Total Time: 3 days
  • Skill Level: Intermediate
  • Estimated Cost: $40 to $80

Painting cabinets is a logical step in a cost-effective bathroom revival project. Given the steep price of new bathroom cabinets, even homeowners who detest painting may begin to entertain its possibility.

This project can easily take a couple of weekends. But if you're willing to take your time to do it right, a new paint job will last for years and will look just as good as you hoped.

Basics of Painting Bathroom Cabinets

Wood bathroom cabinets are the easiest to paint. Moving between similar materials is usually the best path to success with this project. Non-wood-surface cabinets such as melamine or thermofoil can be painted, as well, but the results may not be as satisfactory as with wood.

If you can remove the bathroom cabinets, your task will be much easier. You will not have to worry about the paint overlapping on walls or spilling on the counter or floor. Even if you cannot remove the cabinet, at least you should remove the cabinet doors.

Cleanliness ensures a longer-lasting paint job. While bathroom cabinets do not become as dirty and greasy as kitchen cabinets do, they still can develop a thin film that makes it harder for the paint to stick.


Watch Now: How to Paint Wooden Bathroom Cabinets

Bathroom Cabinet Paint Options

There are two types of paint that you can use for this job: water-based and oil-based. Oil-based paint dries to a durable finish that works well in high-traffic areas and is less likely to show brushstrokes than water-based paint. However, oil-based paint takes longer to dry, and the paint equipment must be cleaned up with chemical solvents. Oil-based paint should always be applied in an extremely well-ventilated area. So, if you cannot move the cabinets to an open area or ventilated garage, make sure that you wear a respirator and that you have a steady flow of air from the bathroom to the exterior.

Water-based (latex) paint dries quickly and can be cleaned up with water. Use a semi-gloss, satin or gloss paint; these are durable and easy to clean. For durability and quality, look for a 100-percent acrylic enamel formula.

What You'll Need

Equipment / Tools

  • Bucket
  • Sponge
  • Rubber gloves
  • Marker
  • Screwdriver or cordless drill
  • Putty knife
  • Primer
  • Paint tray
  • Paint sprayer or paint roller with a smooth-nap cover
  • Natural- or synthetic-bristle paintbrush


  • Drop cloths
  • Painter's tape
  • TSP (trisodium phosphate) or TSP substitute
  • Wood putty
  • 150-grit sandpaper
  • Tack cloth (optional)
  • Paint primer
  • Paint
  • New hinges (optional)
  • New knobs or pulls (optional)


  1. Prepare the Area

    Remove all objects from the cabinets and drawers. Spread drop cloths around the work area to prevent getting paint on your floors. Apply painter's tape to any surface you want to protect, such as countertops where they join the cabinets.

  2. Remove the Doors and Hardware

    Place a small piece of painter's tape on the interior of each cabinet door and drawer. Label each piece to identify which cabinet it belongs to.

    Use a screwdriver or drill to remove the doors and hinges from the cabinets. Remove the drawers, then remove the drawer fronts from the drawer boxes, if possible. If removal is not possible, leave the fronts attached and mask off the fronts from the boxes.

  3. Clean the Cabinets

    Clean the outside surfaces of the cabinet boxes and the doors and drawer fronts with TSP (or a less-toxic substitute) to remove all grease and grime. If you're painting the cabinet interiors (which is optional), clean those as well.

    Tri-sodium phosphate (TSP) is an effective, inexpensive solution. TSP is a mild skin irritant, though, so make sure to wear rubber gloves when working with a TSP solution.


    Some communities ban TSP and other phosphate-based soaps. If so, you can still find effective TSP substitutes (often called "TSP substitute") in stock at most hardware stores or home centers.

  4. Patch and Sand

    Inspect the cabinet boxes, doors, and drawers for nicks and dings. Use a putty knife and wood putty to repair any damage. Smooth the putty with the knife and allow it to dry, then sand it smooth. Lightly sand the outside of the cabinets as well as the doors and drawer fronts, using 220-grit sandpaper. This will help the primer and paint adhere to the surface. Be especially diligent at sanding the indentations in door panels and around any trim. The goal is to roughen all surfaces to accept paint.

    Wipe down the surfaces with a damp cloth to remove dust. For a really clean surface, wipe again with a tack cloth after the cabinets dry.

  5. Apply Primer

    Apply an even coat of paint primer to the exposed surfaces of the cabinet boxes and all of the doors and drawer fronts, using a sprayer, roller, or brush. A sprayer, which you can rent at some hardware stores, works best for this job. If you use a brush, paint with long, smooth, even motions so the brushstrokes are not visible. Don't forget to paint the edges of the cabinet doors. Allow the primer to dry completely, as directed by the manufacturer.


    If you are painting varnished cabinets, most paint manufacturers recommend that you use an oil primer for the preliminary coat. Latex paint will adhere well over oil-based primer.

  6. Apply the First Coat of Paint

    Apply the first coat of paint to doors, drawer fronts, and cabinet boxes. If you are using water-based paint, use a synthetic paintbrush or a sprayer. Oil-based paints require a natural-bristle brush or a sprayer. Don't forget to paint both sides of the doors; it's usually easiest to allow the fronts to dry completely before painting the backs. Allow the paint to dry as directed.

  7. Apply the Second Coat of Paint

    Apply a second coat of paint to all surfaces and allow it to dry for 24 hours, or for whatever full cure time specified by the manufacturer. This may be one week or more, but it allows the finish to harden before the cabinets are returned to normal use.

  8. Reassemble the Cabinets

    Reattach the old hardware or attach the new hardware. Attach the doors to the cabinet boxes, and reattach the drawer fronts to the drawer boxes, if you've removed them. Slide the drawers back in place.


    For a more dramatic makeover, consider replacing all of the hardware during the project to give your cabinets a truly updated appearance.

Watch Now: How to Paint Wood Smoothly