Aquarium Heaters and Saltwater Tank Temps

The Types and Size of Heaters to Use and How to Regulate Tank Temperatures

A good starter Angelfish species: Potter's Angefish (Centropyge potteri). Dave Fleetham/Getty Images

Introduction

Fish and invertebrates are cold-blooded creatures, which does not give them the ability to raise or lower their body temperatures to compensate for their environment. For this reason, it is up to an aquarist to provide heat in the aquarium, as well as maintain the optimal tank temperature that is suitable for them.

What kind of marine animals are kept in the aquarium will help determine these factors.

Therefore, it is important to research and learn all about what are going to keep, particularly when it comes to corals and other invertebrates, as most of these animals do not usually tolerate even minor fluctuations by a few degrees. What type of aquarium heater you choose and how many to use are also vital factors when it comes to heating and maintaining the proper aquarium temperature needed.

The 3 Basic Types of Aquarium Heaters

  • Hang-On-Tank Style: This type provides basic heating and is less efficient because they are only partially submerged in the aquarium water.
  • Submersible Style: This type is much more efficient because the heating unit is fully submerged in the water, which provides more consistent heating of the aquarium.
  • Heating Cable System: This is a type you install underneath your gravel or substrate  and is manipulated by an additionally needed electronic controlling unit. It is used most often in freshwater planted aquariums to eliminate reduction areas (dead spots) by convection, but sometimes are used by saltwater aquarists. This type of unit does distribute heat evenly throughout an aquarium from the bottom to the top (heat rises), and not only heats the water but allows the substrate to retain and generate an evenly distributed heat source. The downside is that when it breaks or wears out you have to remove and replace it, which means you have to dig up your substrate bed to do so. Might be OK for fish-only tanks, but not wise to use in reef systems.

    Heater Usage Tips

    • No matter what type of heater you decide on, it is wise to use multiple units with the hang-ons and submersibles. Putting all your eggs in one basket, so to speak, can present a problem if your one and only heater goes out or breaks, particularly in winter time. This also provides a more even, consistent distribution of heat throughout the aquarium, especially in larger set ups, and doesn't overwork the heaters.
    • Keep a spare heater on hand as a backup.
    • Choose a heater tube length appropriate for the height of your aquarium. Because heat rises, shorter units will not heat as efficiently as taller ones.
    • Unplug your heaters when doing work on your aquarium. If you drain the water down where your heater is no long in the water, or you take it out and remove it to place it aside while you work, the glass can quickly over heat and shatter from the coil still heating.
    • Be sure to check the manufacturer's specifications to see that the heater you choose is saltwater or brackish water safe.

    Other Factors to Consider on Which Type and How Many Heaters to Use

    • Where does heat come from? Other aquarium equipment, indoor home heating units or vents, and other contributing heat sources can add to rising or fluctuating temperatures.
    • How much heat do your lights give off?
    • What is the ambient temperature of where you have your aquarium set up?
    • All of these things will be a factor in determining the size of your heater needs. The basic rule of thumb for wattage is to use between 2.5 and 5 watts per gallon of actual water volume in the aquarium. Example: For 50 gallons of water using 5 watts per gallon you want 250 watts total. You can choose to use 1-250 watt unit, or 2-125 watt units, and so on.
    • Are you going to place the heater(s) in the main tank or a sump? What length of heater(s) you can buy depends on placement.

    Temperatures Conversion Tip

    • Referred to in degrees (°) as Celsius or Centigrade (C), and Fahrenheit (F), most saltwater aquarium books and articles use only one reference or the other, therefore to convert from °C to °F, or vice versa, you'll find this unit conversion calculator from Aquatics by Design helpful.

    Maintaining an optimal and steady temperature is of the utmost importance to your tank inhabitants, but can sometimes present challenges for many aquarist, especially during cold winter or hot summer months. One solution to controlling falling, rising, or constantly fluctuating temperatures any time of the year is to install a chiller.