Removing a Damaged Screw With a Screw Extractor

Brown screw being driven into wood by phillips bit in power drill
Steve Heap / Getty Images
Overview
  • Working Time: 20 mins
  • Total Time: 20 mins
  • Skill Level: Beginner
  • Estimated Cost: $10 to $25 (for extractor bit set)

Removing a screw or bolt can be exasperating if the slots on the screw or the head of the bolt have been damaged from efforts to remove the fastener. This can easily happen if the fastener is rusted in place, or if you've used the wrong-sized tool. A few slips of the screwdriver or wrench and the head of the screw or bolt can be so damaged that it's almost impossible to get a good grip on it with your tool.

To your rescue comes this clever little accessory—the screw extractor. Screw extractors come in a range of sizes for screws of diameters ranging from 3/32 inch to upwards of 1/2 inch. They can be used on all manner of screws, as well as many bolts.

Screw Extractor Design

A screw extractor is a high-strength steel shaft with a square head on one end and reverse tapered cutting screw threads on the other end. The square head fits into a T-handle that's used to turn the extractor. You can also grip and turn the head of the tool with locking pliers.

The tapered threads are at the business end of the tool. These are designed to screw backward (counterclockwise) into the head of the screw or bolt after a pilot hole has first been drilled. The end is sharply tapered so that the extractor digs into the damaged screw deeper and tighter as the extractor is turned. So while you're turning the extractor counterclockwise, it's digging into the damaged screw more and more as the damaged screw is backing out.

screw extractor
Home-Cost.com

A T-handle is a useful accessory when using a screw accessory. Named for its shape, the handle fits over the end of an extractor bit. T-handles are made to fit a variety of extractor sizes, and many types also work with taps for threading holes. If you don't have a T-handle, you can turn a screw extractor with locking pliers.

What You'll Need

Equipment / Tools

  • Drill and twist bits
  • Screw extractor bit
  • T-handle or locking pliers
  • Hammer

Instructions

  1. Drill a Pilot Hole

    To use a screw extractor to remove a screw, drill a pilot hole into the center of the damaged screw, using a power drill and a twist bit of appropriate size. If the head of the damaged screw is rough or uneven, it can help to start with a very small pilot hole, such as with a 1/16-inch bit. Then, drill a larger hole with the bit sized for the extractor. Keep the following tips in mind:

    • The pilot hole diameter varies according to the extractor size you are using. Follow the recommendations on the package that came with the extractor.
    • Since you're drilling in metal, keep the drill speed slow and steady; drilling too fast will overheat the bit and dull it quickly.
    • Be very careful not to break off the drill bit inside the hole, especially when drilling with small bits.
  2. Extract the Screw

    Attach the extractor bit firmly to a T-handle or grip it with locking pliers. Place the extractor bit into the pilot hole in the damaged screw.

    Using a hammer, tap the extractor firmly into the pilot hole. Apply downward pressure on the extractor while turning it counterclockwise to remove the damaged screw.

    If the extractor slips and loses its bite in the screw, try these tips:

    • Tap the extractor more firmly to get a better bite into the screw.
    • Push down more firmly as you turn the extractor counterclockwise.
    • Enlarge the pilot hole slightly and try again.