Rick Dale of Rick's Restorations Talks About His Craft

  • 01 of 06

    Rick Dale Talks About His Craft

    Rick Dale in His Office at Rick's Restorations
    Rick Dale in His Office at Rick's Restorations. Photo Copyrighted by Jay B. Siegel

    With more than 8,000 Coke machine restorations in his rear view mirror, Rick Dale is way beyond an expert when it comes to putting a spit shine on a rusty beverage dispenser. He’s done such a phenomenal job proving himself as the master of the metal renovation, in fact, that he starred in the History Channel’s show American Restoration for more than five years. That break came after being "discovered" through his cameo appearances on Pawn Stars.

    Of course, you can’t help but wonder how...MORE Dale could be so enthusiastic about tackling all those broken down projects on a reality show. Was it all a put on? There’s no doubt that some of the “moments” on the program had to be staged – it makes for entertaining television. But Dale’s affable persona, dedication to his work, and love of mantiques played out on the show aren’t far from what you find sitting across his desk discussing his experience, motivation, and what he would restore if anything were possible.

    See some of Dale’s amazing restorations and read about how he got started in slide two.

    Continue to 2 of 6 below.
  • 02 of 06

    Rick Dale: From His First Restorations to Today

    Restored Coke and Pepsi Machines on Display at Rick's Restorations
    Restored Coke and Pepsi Machines on Display at Rick's Restorations. Photo Copyrighted by Jay B. Siegel

    When he was 9 years-old, Rick Dale’s dad gave him an old bicycle to restore. His father believed in the pride that comes from a job well done and wanted to instill this value in his son. “When I’d ride that bike around the neighborhood, I was the happiest guy alive,” Dale told interviewer Pamela Y. Wiggins while flashing his famous smile.

    He worked with his dad to build a soapbox racer later, and from there he went on work on cars, motorcycles, hot rods, and eventually the Coke machines and gas...MORE pumps that got him into the business of restoring Americana through his Las Vegas, Nevada shop known as Rick’s Restorations. “It all just came together,” as Dale put it.

    “I mainly did Coke machines and gas pumps in the beginning – stuff people weren’t buying in America. Most of them were going to Japan. I just couldn’t understand why people here didn’t want this stuff back then! Now they do!”

    Dale still sees his share of vending machines, including brands other than Coca-Cola, and gas station memorabilia come into the shop, but fans of his show know that’s not all he’s tackling these days. From giant rocket slides to bumper cars, the objects rolling into the shop from around the globe are continually amazing him, and some in not such a good way.

    The hardest project he’s seen so far was a motorized surfboard featured on American Restoration. “It took six months, and there were so many problems with it. But I did it,” said Dale with just a hint of exasperation.

    In the past, people would bring in items that might need minimal work beyond a good cleaning. That’s no longer the case. “I think all the good stuff is gone. The stuff people bring in now is testing me.”

    Those tests range from dilapidated components filling a cardboard box requiring complete reassembly to all types of machines missing parts and rusted beyond repair. “Only two pieces have come in that were totally like that. Basically I was going to have to rebuild a replica because what was there wasn’t usable and too many parts were missing.”

    Beyond those scarce instances when he just didn’t have enough to work with, all those “tests” he takes on are welcome challenges. “After 30 years in this business, I learn something new every day,” Dale added emphatically. “It’s labor intensive, but it’s a labor of love. I absolutely love what I do.”

    See Dale with one of his favorite restoration projects ever on slide three.

    Continue to 3 of 6 below.
  • 03 of 06

    How Important is Maintaining Value When Rick Dale Approaches a Restoration?

    Rick Dale with One of His Favorite Restorations Ever
    Rick Dale with One of His Favorite Restorations Ever. Photo Copyrighted by Jay B. Siegel

    In the antiques business, there’s an undercurrent of original being best and altering an item too much being a really bad thing that can severely hurt, if not completely ruin, a piece. But Rick Dale sees a difference in preserving antique value and keeping a family heirloom from deteriorating when it comes to the items people bring into Rick’s Restorations. Dale explains that antique or collectible value isn’t as important to most of his clients as it is to true collectors:

    “Most of the...MORE restorations I do have nothing to do with what they’re worth. I’m restoring memories. It’s total emotion.”

    Personally, Dale tries not to get too attached to his restoration projects. He sees himself as a picker in the business of selling restorations that aren't commissioned by the original owners, many of which were featured on American Restoration in the past. An old Western style vending machine on display in his lobby along with a number of other restored pieces being offered for sale were some of his favorite projects ever. That Western vending machine has a price tag on it, but with a five figure value he knows he’ll be hanging on to it for quite some time - and that’s fine with him.

    Find out how Dale determines the cost of a restoration on slide four.

    Continue to 4 of 6 below.
  • 04 of 06

    How Does Rick Dale Know How Much a Restoration Will Cost?

    1930s Slot Machines Restored by Rick's Restorations
    1930s Slot Machines Restored by Rick's Restorations. Photo Copyrighted by Jay B. Siegel

    When Rick Dale evaluates how much of an investment it’s going to take to bring an item back to life, believe it or not, those figures really are computed on the fly just like they were when he was on American Restoration. Given his vast experience, he looks at a project and knows almost immediately how many man hours it will take, the likelihood of having to fabricate replacement parts, and the materials needed to complete a job. And most of those figures he quotes are steep with reason,...MORE especially when a complete restoration is required.

    “We’re focusing on the look of a piece. First we try to find an original part. If that’s not working, we try to buy another one we can use for parts. Finally, if we can’t get an original, we make it in the fabrication room.” Dale’s fabrication room consists of “vintage” machinery he’s bought at auction and other equipment he’s been able to procure. These machines help his crew manufacture parts very close to those originally used in the old stuff his team restores.

    “When it comes to whether or not it’s worth it, the price usually speaks for itself,” Dale added. He doesn’t like to tell anyone no because so many people are seeking those emotional restorations that mean so much to them. As long as folks are willing to pay the price, he’ll usually take on the job.

    Find out what Dale thinks about do-it-yourself restorations on slide five.

    Continue to 5 of 6 below.
  • 05 of 06

    What Does Rick Dale Think About DIY Restorations?

    Rick Dale with Radio Available for Purchase and Restoration in His Shop
    Rick Dale with Radio Available for Purchase and Restoration in His Shop. Photo Copyrighted by Jay B. Siegel

    Contrary to what you might believe, restoration pro Rick Dale doesn’t discourage do-it-yourself projects inspired by his work on American Restoration. After all, that’s how he started out. He does encourage taking time to do things right, and learning from your work along the way. He also cautions to be very careful when working beyond your skill set. For instance, he prefers to work on objects made of metal rather than working on old wooden furniture.

    "Wood is not forgiving. If you make a...MORE mistake, it’s over. And if you have to change things too much, the value is totally going down," Dale remarked.

    That doesn’t mean Dale won’t take on projects primarily made of wood, but most of those are pieces with mechanical workings, like the old radio shown here, rather than basic furniture pieces. With some basic skills and lots of patience, Dale feels it’s perfectly fine to approach a restoration project at home. "It’s not going to kill you. Just use some common sense."

    He also offers these points of advice for do-it-yourselfers ready to begin a restoration project:

    • Research everything you possibly can about a piece before beginning a project, including the value in the present condition and if it were fully restored.
    • Remember there’s a difference between doing haphazard repair work and a complete restoration. Use as many original parts as possible, original paint colors, and any other details pointing to authenticity that will lend to restoring an object to its original condition.
    • Don’t give up, even when you get frustrated. Step back and start again when needed.
    • Take as many photos as possible before, during and after to document a project. Make yourself a manual as you go along.

    Learn about Dale’s ultimate restoration project on slide six.

    Continue to 6 of 6 below.
  • 06 of 06

    What is Rick Dale's Idea of the Ultimate Restoration?

    The Façade of Rick's Restorations in Las Vegas, Nevada
    The Façade of Rick's Restorations in Las Vegas, Nevada. Photo Copyrighted by Jay B. Siegel

    You often see parts of a town revitalized, like a soda fountain or an old filling station, and those nostalgic recreations are generally filled with the types of restoration projects Rick Dale loves. His visualization for “what if” is actually bigger than a single business, and a project most people would see as monumental:

    “My dream is to restore a 1940s main street that has gone under from one end to the other.”

    The façade of his  shop, Rick’s Restorations – which is really more of a compound...MORE for his restoration gang than a mere workshop – reflects his vision for the ultimate restoration. A filling station, five and dime storefront, and a movie theater with a marquee welcome fans as they drive into the yard.

    After seeing the work going on inside that shop, whether firsthand or recalling his television show, you can’t help but believe that if any one person could undertake restoring an entire historic main street to its original glory it would have to be Rick Dale.

    Visit the Rick's Restorations team on Facebook to see their latest projects and visit www.ricksrestorations.com to learn about visiting the shop in Las Vegas, Nevada.