Cold bedroom floors are challenging in the morning. Make it easier to get out of bed on those oh-so early mornings by putting down an area rug that's large enough to give your feet a soft landing. Even if you have wall-to-wall carpeting, you can layer on a cozy area rug under your bed to muffle sound and add color, texture, and pattern to your space. To make sure your area rug is well-proportioned for your size bed, consider the following guidelines.
What Should Sit on the Area Rug?
What seems like a simple question requires some thought. A square or rectangular area rug works best under any size bed. But in addition to a bed, you might have two nightstands and a bench by the foot of your bed. You'll need to make a few small choices about what goes on top of your area rug. There are four options when it comes to placing an area rug under your bed:
- Only the entire bed frame sits on the area rug.
- The entire bed frame, nightstands, and a bench at the foot of your bed all sit completely on the area rug.
- Only the lower two-thirds of the bed, plus a bench at the foot of your bed, sits on the area rug, which leaves the head of your bed and any nightstands sitting on the bare (or carpeted) floor.
- Only the lower third of the bed, plus a bench at the foot of your bed, sit on the area rug, leaving most of the bed on the bare floor. More of the area rug will jut out into the rest of the room. This option works best if you're laying a smaller-size area rug down over carpeting to give the room color and texture.
You don't want to end up with half of your table legs on the area rug. It'll make for a precarious situation when you go to put your glass of water on a wobbly nightstand. The same problem may happen at the foot of your bed. Half of your bench sitting on an area rug can cause you to feel slightly lopsided and unbalanced when you sit down.
Area Rug Sizes for a Small Bedroom
If your bedroom is tiny, think big when it comes to an area rug. In a smaller room, select a rug that's large enough to nearly fill up the entire space. Be sure to leave between two inches and five inches of bare floor between the rug and the walls.
If you have a twin-size or full-size bed in a small room, use these general guidelines for the size area rug you'll need. Note that twin-size beds typically measure about 39 inches wide by 75 inches long (a twin XL, designed for taller people, measures 80 inches long). A full-size bed, or double bed, measures 54 inches wide by 75 inches long.
- A 4-foot by 6-foot or a 5-foot by 8-foot area rug fits the bottom two-thirds of the bed only.
- A 6-foot by 9-foot area rug fits the bed, a nightstand, and a bench at the foot of the bed.
- A 9-foot by 12-foot area rug fits two twin-size beds, one nightstand in the center of the two beds, and two benches at the foot of each bed.
Area Rug Sizes for a Large Bedroom
Choosing a rug that's too small for a large bedroom will throw the space off balance. If you do choose a large rug that fills up most of the room, leave at least eight inches of space between the edges of the rug and the walls.
In a larger room, you may have a queen-size or king-size bed. Use these rough guidelines to choose an area rug that will look good in a big bedroom. Take into consideration the measurements of larger beds. A queen-size bed measures 60 inches wide by 80 inches long. A king-size bed measures 76 inches wide by 80 inches long. A California king-size bed measures 72 inches wide by 84 inches long.
- An 8-foot by 10-foot or a 9-foot by 12-foot area rug will fit the bottom two-thirds of a queen-size or king-size bed, but not the nightstands.
- A 12-foot by 15-foot rug will look balanced under the longer California king-size bed, and this size area rug will even fit under nightstands.
- A general rule of thumb suggests that an area rug should always extend at least 18 inches to 24- inches from the sides and from the foot of a queen-size and a king-size bed.
Area Rugs Under Dressers
Regardless of the size of your bedroom or bed, an area rug should not push up against the edge or legs of a dresser or other large piece of furniture. Choose a rug that's large enough to fully slip underneath the entire dresser. Or, pick an area rug small enough so that you can leave at least two inches or three inches of floor showing between the edge of the rug and the piece of furniture.
Keeping Your Area Rug in Shape
Even when your area rug is under the bed, the edges can still bunch up to cause a tripping hazard. Double-sided carpet tape is one of the best solutions. Alternatively, a nonslip rug mat placed under the entire area rug will keep the edges down.
Keep your area rug looking new with the right maintenance. An area rug under the weight of a bed will become indented. Take care to turn your area rug every so often so you can remove the indentations with an ice cube treatment. Let a small ice cube melt on the indentation, then fluff up the fibers with your fingers. Just be sure you thoroughly dry the spots you've iced so you don't accidentally step into a puddle of cold water in the morning.