Ruffled Edge Bead Flower

  • 01 of 11

    Brick Stitch Ruffles

    Ruffle Flower Bead DIY tutorial
    Ruffled flower made with brick stitch. Lisa Yang

     I just got done writing a tutorial on how to add ruffles to a peyote stitch band, so I figured I would try a similar technique with brick stitch.  My favorite type of brick stitch is circular brick stitch, and I am generally pretty fanatical about trying to keep my circles even and flat. I really welcomed this opportunity to try and make my brick stitch wavy around the edges and not even in every way.

    Continue to 2 of 11 below.
  • 02 of 11

    Brick Stitch Ruffle Flower Materials

    Ruffle Bead Flower Tutorial Materials
    Materials used to make a ruffled bead flower. Lisa Yang

     For this project, I used a combination of 11/0 Miyuki Delica beads and 11/0 Czech beads. The center of the flower is a 4mm round faceted glass bead. I used Nymo size D thread (on a cone) and a Tulip beading needle

    I chose to use the Delica beads as the first three rounds of beading so that there would be many spaces (bridges) to stitch into for the later rounds when I wanted to make it ruffled. I'm not sure if that is a requirement for this design, but it worked.

    Continue to 3 of 11 below.
  • 03 of 11

    Prepare the Center Bead for Circular Brick Stitch

    Brick Stitch Ruffle Flower Tutorial
    Surround the bead with thread to start the brick stitch. Lisa Yang

    To start circular brick stitch beading, pick up the 4mm round bead leaving at least a 6 inch tail. Stitch back through the bead two more times, placing the thread loops on either side of the bead. I actually like to go around the bead two times since it seems to hold the beadwork more tightly around the center bead.

    Continue to 4 of 11 below.
  • 04 of 11

    Start the Circular Brick Stitch

    Ruffle Flower Tutorial
    Start brick stitch around the center bead. Lisa Yang

    Pick up two beads for the first round of circular brick stitch. Stitch under the thread bradge around the bead from the back side to the front. Separate the beads and push the delica beads flat against the center bead. Stitch back up through the last bead you added to secure them both in place.

    Continue to 5 of 11 below.
  • 05 of 11

    Continue Brick Stitch

    brick stich flower tutorial
    Pull thread tight and flatten beads against the center bead. Lisa Yang

     Pull the thread taut and adjust the beads. Continue stitching around the center bead, adding a single bead at a time for the rest the round.

    Continue to 6 of 11 below.
  • 06 of 11

    Keep the Brick Stitch Smooth

    Ruffle Bead Flower Tutorial
    Finish the first row of brick stitch. Lisa Yang

    When you get to the end of the round, be sure not to add too many beads that might cause the beadwork to buckle at this point. The first few rounds are smooth - the ruffles will be created on later rounds.

    Continue to 7 of 11 below.
  • 07 of 11

    Finish the First Brick Stitch Round

    Brick Stitch Ruffle Tutorial
    Close the first row of brick stitch. Lisa Yang

     To close the gap, stitch down through the first bead on the round, under the thread bridge and then back up the same bead.  This will position you to start the second round of beads.

    Continue to 8 of 11 below.
  • 08 of 11

    Continue Two More Rounds of Brick Stitch

    Brick stitch ruffle flower DIY
    Continue to make 2 more rounds of brick stitch. Lisa Yang

    Add two more rounds of brick stitch following the same basic instructions. Start the first stitch of each round with two Delica beads and then add one bead at a time for the rest of the round.

    Continue to 9 of 11 below.
  • 09 of 11

    Ruffle Edge Brick Stitch

    Ruffle Edge Brick Stitch Flower
    Add a very crowded picot edge to make a ruffle on the outter edge. Lisa Yang

    Similar to the peyote ruffle, the brick stitch ruffle is actually multiple picot edge stitches that overcrowd the edge causing it zig zag and ruffle along the edge.

    To start the picot, pick up three size 11/0 Czech seed beads. Stitch under the thread bridge and back up through the last bead added. This will form a small triangle. Refer to this tutorial for a more detailed view of adding a brick stitch picot edge.

    Move to the next thread bridge and add another picot by picking up two beads and...MORE stitching up through the last bead added. To make it ruffle, you will add another picot stitch into the same thread bridge opening. Pick up two more beads, stitch back into the thread bridge you just stitched into and back up into the second bead you just added. Make sure the beads lay flat against the center beadwork (they will align in front or behind the previous picot stitch).

    Continue alternating two picots stitches in a bridge with one picot stitch all the way around the brick stitch.

    Continue to 10 of 11 below.
  • 10 of 11

    Completing the Picot Ruffle Round of Brick Stitch

    Ruffle Bead Flower Tutorial
    Continue adding picots, crowding them by adding two in one space,then one in the next. Lisa Yang

    To complete the round of picot stitch ruffle, pick up one bead and stitch down into the first bead on the round, through the last thread bridge and back up the first bead on the round. This will complete the round of ruffle brick stitch.

    I have not experimented with adding multiple rounds of brick stitch ruffle yet, but I am sure it is possible.

    Continue to 11 of 11 below.
  • 11 of 11

    Using the Ruffle Brick Stitch Flower Component

    Bead Ruffle Tutorials
    Peyote ruffle band with brick stitch ruffle bead for closure. Lisa Yang

    My plan is to use the ruffle brick stitch flower component as part of a clasp on the peyote ruffle bracelet band. One side will have the brick stitch flower, while the other side of the peyote band will have a bead loop.

    The ruffled brick stitch components will also look great as earrings or a pendant.