Simple to Sew Firewood Log Carrier

Firewood Log Carrier
Janie Airey / Getty Images
  • 01 of 04

    Materials Needed and Cutting Instructions to Make a Simple Log Carrier

    A simple to sew log carrier all set to carry filled with firewood
    Debbie Colgrove

    This is a very simple to sew sewing project that will create a sturdy log carrier for your firewood. We like having two ready to bring in the firewood so we can balance the load with one in each hand and we can get the job done in half the time.

    This carrier makes a great housewarming gift for someone who purchases a home with a fireplace or wood stove. Make two so they can carry two loads at once.


    • 1/2 to 2/3 yard of 54"-60" wide canvas. The amount of fabric will be the width of the carrier. A 1/2 yard is ample for most wood stove firewood but if it is for firewood longer than 18" it's advisable to use 2/3 yard.
      This will make two carriers. Use store flier coupons to stock up on this staple fabric. Remember to watch lumber yard and tool store fliers for discount canvas paint drop clothes for what can be a bargain price for very sturdy usable canvas fabric.
    • Webbing - 3 yards of 1 1/2" wide webbing (Narrower straps could be used but this width gives the carrier more strength and the handle area will fold for a comfortable handle.) Webbing Sources
    • 1 foot of 1/4" to 1/2" rope (clothesline type of rope that you have around the house - or multiple pieces of cording if you have that around the house)
    • Quality thread (Is There a Difference in Thread - You Be the Judge)


    • Square the canvas fabric and cut on the fold for two equal pieces of fabric.
    • Mark the width of fabric edges on the very edge just so you recognize the edge as the width of the fabric edge.
    • Remove the selvedge.
    Continue to 2 of 4 below.
  • 02 of 04

    Finishing the Edges of the Fabric - Hemmed Edges

    Hemming the fabric edges with baby hems
    Debbie Colgrove

    Hemming the Edges

    • Turn under 1/4" on the width of the fabric edges.
    • Turn under again to enclose the raw edges.
    • Use needle position or guides on the presser foot to sew the hem down, sewing as close to the free edge as possible.
    • Repeat for the remaining ends which will be the top and bottom in the remaining directions.Trim the corners before you sew the hem down to prevent bulk.
    Continue to 3 of 4 below.
  • 03 of 04

    Strap Placement and Sewing

    A photo showing the final placement of straps to create a strong log carrier.
    Debbie Colgrove
    • Carefully use a flame to melt the ends of the webbing to prevent it from unraveling.
    • Fold the length of webbing in half and mark the fold.
    • Lay the fabric out flat so the width of the fabric is on the sides.
    • Mark 4" in from the sides
    • Gently fold the fabric in half, matching the top and bottom, to find the center.
    • Starting at the center, lay the strapping down and run it towards the mark at the top edge, down the other top marking to the center fold on the fabric.
    • Place the fold of the webbing on the fold of the fabric and pin in place.
    • Repeat to bring the end of the webbing to the starting point.
    • Align the outside edge of the webbing with the 4" markings, keeping it even the entire distance from end hem to end hem.
    • Sew the webbing in place by sewing along the edges of the webbing to the top/bottom hem and pivoting to sew across the top/bottom of the straps, sewing all edges of the strap to hold it firmly to the fabric.
    • Repeat for the second side of the strap.
    • Zigzag stitch over the butted ends of the webbing.
    Continue to 4 of 4 below.
  • 04 of 04

    Sew the Strap Handles

    Rounded Handles on Webbing Strap Handles
    Debbie Colgrove

    This step will guide you through making a comfortable handle on the straps, which will help prevent the straps from cutting into your hand when carrying a heavy supply of firewood.

    • Fold the bag so the attached straps are on top of each other to find the center of the strap handle area.
    • Mark the center.
    • Mark 4" to both sides from each center mark.
    • Lay a 6" piece of rope on the center of the strap/handle on the inside of the strap.
    • Fold the handle strap area in half with the inside side of the webbing folded over itself to enclose the rope in the webbing.
    • Sew along the edge of the straps to sew the two layers of the strap together for the 8" span.
    • Sew across the ends of the folded area to make sure the rope stays enclosed.