01 of 08
Simplified Dutch Spiral Stitch
Edited by Lisa Yang
Dutch spiral is an unusual stitch that results in a pretty spiral with a drape of loosely attached beads. It is basically a peyote stitch spine with a beaded swag.
This step by step will show you how to make a simplified version of Dutch spiral rope that is easy to learn and maintains a spiral and swag pattern. The resulting tube has interesting texture and depth thanks to the loose swag beads and a nice spiral pattern that can be emphasized by your choice of bead colors.
This... stitch works well to make tube beads, fancy pendant bails, bracelets and if you are very ambitious bracelets or necklaces. Although the stitch is very easy to learn, it takes some time to get a good length made since the tube is on the wider side. You could always adjust the number of beads to make it a little smaller, though.
Continue to 2 of 8 below.
02 of 08
Dutch Spiral Bead Tube Materials
To make the simplified Dutch spiral tube, you will need the basic bead working supplies of a beading needle, beading thread, scissors and at least two colors of size 11/0 seed beads. I think round seed beads will work better than delicate (tube beads) for this stitch, but I have not tried cylinder beads to know for sure.
I am using Nymo thread size D in light tan (from the cone, not bobbin), a Tulip beading needle (which are my favorites) and three colors of 11/0 seed beads - aqua for the swag... beads and gold and black for the spiral beads.
When you select your beads, you will have one color that is the main support that I call the spiral bead and the other that is the swag bead. Also, if you wonder why I always specify that I use Nymo thread from the cone, not the bobbin, go to the link and read the review of Nymo thread. As much as the bobbins are affordable and come in gorgeous colors, the thread is different between the cones and the bobbins.
Although I used Nymo for this project, I actually think Fireline would have worked better since it would keep the tension tighter - which is very important for this project to maintain its shape.Continue to 3 of 8 below.
03 of 08
Pick up Your Beads for the Dutch Spiral Rope
To get started, on a comfortable length of thread, pick up your beads in the following order:
1 spiral bead, 3 swag beads, 1 spiral bead, 3 swag beads, 1 spiral bead, 3 swag beads, 1 spiral bead, 3 swag beads.
Continue to 4 of 8 below.
04 of 08
Start the Dutch Spiral Rope
Tie the beads into a circle using a square knot and put your needle through the first spiral bead, in my case, a black bead.
Continue to 5 of 8 below.
05 of 08
Stitch the First Row of Dutch Spiral Rope
To stitch the first row, pick up 3 swag beads and one spiral bead on your needle. Stitch back through the next spiral bead in the ring. Repeat this pattern until you have stitched through all of the beads on the row.
3 B and 1 A. Pass needle through the next A bead in the ring. Repeat until you have four sets of 3 B and 1 A.
Continue to 6 of 8 below.
06 of 08
Continue Stitching the Dutch Spiral Rope
Continue to stitch around the spiral by adding three swag beads and one spiral bead each time and passing through the next spiral bead in the ring. After several rows, a tube will start to form. You need to keep the tension tight.
It may be difficult to hold on to the spiral at first. You can always begin by stitching around a dowel or a pencil until the spiral holds it's shaped.
Continue to 7 of 8 below.
07 of 08
Make a Dutch Spiral Beaded Bead
When your tube is long enough, finish the side by going back through the ring of beads and tying off the thread. In the case of this bead, I reinforced the top edge and then went through the spiral beads back to the tail and tied them off together and then wove in the ends.
Continue to 8 of 8 below.
08 of 08
Make a Larger Dutch Spiral Tube
A longer tube can be made into a bracelet, like this Copper Leaf bracelet, or a larger bead or ball for a beaded pendant.
For some ideas to vary the stitch, try using size 15 seed beads, hex cut beads, and drop beads.