Tap Water Purification Methods

Ways to Treat Tap Water Before Use in Aquariums

After reading about the problems with using untreated tap water to make-up sea salt mixes or add as top-off water to saltwater aquarium systems, here are methods for how to purify it before use that can help avoid many of the potential problems that can arise from doing so.

  • Pretreat the tap water with chlorine, then dechlorinate it before pouring it into our system or making-up your sea salt mix. This method of treating tap water may be good for killing off potential bacteria that may be present, but it does not remove contributory problem chemical elements such as phosphates, nitrates and silicates that give rise to algae blooms, or heavy metals such as copper or iron that are detrimental to reef animals.
  • Purchase a basic tap water filter. These types of filters may not be ideal, but they do somewhat improve water quality by removing chlorine and some contaminates, and are better than using nothing. We use a Teledyne WaterPik Filter on our kitchen tap for drinking, as well as adding top-off water to our 55 gallon aquarium.
    • Purchase an RO, DI, or better yet a combination RO/DI water filter unit. The initial investment may be costly for one of these units, but they pay for themselves rather quickly, and are by far the most effective water purifying filters on the market.
    There is nothing that says you absolutely cannot use tap water in saltwater aquarium systems, but most aquarists that have done so and experienced problems will tell you not to do it!
    If you insist or persist in doing so, at least consider putting into action any of the above suggestions to purify the tap water before using it, or consider any of the following alternative water sources instead!

    Next Page > Alternative Water Sources to Consider

    The following fresh water source alternatives should be considered in place of using tap water to make-up sea salt mixes or add as top-off water to a saltwater system. The reason being, that even after filtering or purifying tap water, it can still potentially contribute to problems that often arise in aquariums.

    • Check with local fish stores in your area to see if they sell RO/DI (Reverse Osmosis/Deionization) filter unit processed water.
      • Check with any public aquariums or commerical water companies in your area to see if they sell filtered fresh water. Even better yet, rather than having to make up sea salt mixes at all, see if they sell filtered "natural" sea water like the Seattle Aquarium in Washington State or the Catalina Water Company in Los Angeles does.
      • Find out if there are any public RO/DI water dispensers set up in your area. Kind of like a vending machine, you put your money in, and it pumps filtered water out. Believe it or not, one of these units was set up here on the island of Moloka'i in 2002, right in the town of Kaunakakai where we live!
      • Buy bottled water from a water bottling company that uses commercial RO/DI units.
      • You can also use bottled distilled water, but one concern with this type of water is that the bottler may use copper tubing during the distilling process. Not all distillers use copper tubing, so if this is a concern, test the water prior to use for any copper levels. You can always contact the manufacturer and inquire about their processing methods.
        The most important thing to consider when deciding on a water source is, how much you are going to need? Keep in mind that if you have a small aquarium, say below 30 gallons, buying bottled water may be cost effective, but not so with a larger sized aquarium.

        Previous Page < Ways to Treat Tap Water Before Use